Square-Neck Satin Camisole with Twin Lace Side Godets and Scalloped Tap Shorts

Pair a square-neck camisole with loose scalloped tap shorts

This square-neck satin camisole and tap shorts set contains exactly two smoky-plum garments. The top combines two adjustable charcoal straps with twin black floral-lace side godets, while the separate short uses a gathered satin-like waist and black scalloped lace panels at both outer legs.

The image records design intent only. Fibre content, weave, dimensions, transparency, stretch, graded fit, colour and production readiness remain pending.

Confirm exactly two garments in the sellable pack

The proposed set contains one camisole and one loose tap short. Assign each piece a component code and document the intended plum and black colour references, label position, folding method and sealed-pack count.

No bra, brief, thong, robe, stockings, garters, hanger or jewellery is included. Approved samples must define the final pack.

Measure the square neckline from four fixed corners

Record neckline width, centre-front drop, left and right corner position and the length between each corner and strap join. Check the top edge for skew, rippling or stretch growth after hanging and after the proposed care cycle.

Coverage depends on finished measurements, strap setting and individual fit; the neckline name does not establish a universal result.

Grade both adjustable straps as a matched pair

Measure each strap at minimum and maximum settings, including slider travel, elastic extension, anchor width and the front-to-back attachment distance. Both sides should hold the chosen length without creeping or twisting the square neckline.

Strap fibre, hardware material, coating, corrosion resistance and pull strength remain pending supplier documents and samples.

Track the satin-like centre panel by grain and drape

Mark warp, weft and any proposed bias direction, then record centre-front width at neckline, chest, waist and hem. Condition the top before final length measurements so relaxed drape is not confused with permanent growth.

Satin-like describes the visual sheen only. It does not establish silk content, fibre blend or exact weave.

Mirror the two floral-lace side godets deliberately

Label the left and right triangular inserts separately and measure top point, base width, seam length, motif direction, scallop placement, transparency and stretch. Compare both sides for shade and balance under controlled lighting.

Acceptable motif variation must be written into the quality specification before cutting bulk lace.

Inspect all four godet seams for puckering

The two inserts create four long joins with the satin-like body. Check stitch density, seam allowance, differential feed, thread tension and recovery so the smoother centre does not ripple beside the more open lace.

Internal edges should be secured and free from abrasive thread ends, exposed elastic or hard seam overlaps.

Measure the camisole hem after fabric conditioning

Record centre-front, centre-back and both side lengths, plus total hem sweep and finished edge width after the garment rests for a defined period. Compare flat and hanging measurements to detect twist or uneven growth.

Final top length and size-to-size change remain pending graded patterns and approved samples.

Specify the tap-short waistband by relaxed and extended size

Measure relaxed waist, maximum approved extension, elastic height, casing width, gathering ratio and recovery after repeated cycles. Inspect the seam join and any internal elastic edge for pressure points or rolling.

Elastic composition, extension limit and durable recovery require material evidence and physical testing.

Map the two scalloped lace panels at the outer legs

For each short panel, record upper width, lower sweep, side-seam length, motif direction, scallop depth and transparency. Check that the left and right panels meet the waistband and leg hem at matching heights.

The lace edge should be evaluated for snagging, loose motifs, rough cut points and distortion after movement.

Verify rise, inseam and crotch construction

Capture front rise, back rise, crotch width, inseam, side depth, leg opening and hem sweep for every size. Inspect the crotch and inner-leg intersections for bulk, skipped stitches, seam slippage and exposed thread.

A gusset, lining or hygiene insert is not assumed; any such component must be listed and tested if added.

Build one coordinated size chart for both pieces

Supplier letters must be supported by bust, waist, high hip, top length, strap range, short rise and leg-opening measurements with tolerances. Review neckline level, godet position, waistband pressure and short drape across every proposed size.

The sellable range remains pending graded samples and consenting-adult apparel fit trials. Individual bodies and preferred looseness vary.

Test satin, lace, straps and elastic as separate systems

Request fibre declarations, mass, stretch, recovery, shrinkage, snag and seam-slippage data for the plum satin-like fabric, black floral lace, straps, waistband elastic and thread. Repeat key garment measurements after the proposed care cycle.

Exact softness, breathability, opacity, durability and service life are unconfirmed until verified on production materials.

Validate plum dye, black trim and care wording

Run dry and damp rub checks, wash trials and a perspiration-simulant assessment on every colour and trim. Record dye transfer, shade change, water spotting, loss of sheen, shrinkage, lace distortion, elastic damage and hardware discolouration.

Washing temperature, detergent, drying and ironing instructions must follow verified results for the weakest component.

Set a landed-price plan from cami-short references

An Alibaba public category page displayed a satin lace-trim cami and short set at USD 3.27 to 3.52 with MOQ 10. Another sourcing page displayed a satin cami and short reference at USD 3.10 to 3.90 with MOQ 50 and a two-piece lace cami set at USD 2.00 to 2.15 with MOQ 10. These are broad benchmarks, not quotations for this square-neck twin-godet design or approved suppliers.

The public procurement benchmark supports an EUR 39.99 planning price after provisional allowance for China-origin freight, graded samples, square-neck and strap checks, twin-godet and short-panel inspection, colourfastness, wash validation, discreet fulfilment and expected apparel handling loss. Exact supplier, quote, MOQ, sizes, colours, fibres, packed weight, freight, duty, tax, certification, payment terms, lead time and production availability remain pending.

Frequently asked questions

How many garments are included?

Exactly two are proposed: one square-neck camisole and one matching tap short.

How many lace godets are on the camisole?

Two triangular floral-lace side inserts are specified, one on each lower side.

Are both shoulder straps adjustable?

Yes in the concept, but final strap range and slider holding force require sample approval.

Is the fabric made from silk?

No silk claim is made. Exact fibre and weave remain pending supplier documents and tests.

Which sizes will be offered?

The final range and measurement chart await graded samples and fit approval.

Is a robe or separate brief included?

No. The proposed pack is limited to the camisole and tap short shown.