Black Threaded Prostate Massager with RGB-Window Safety Base and Oval Remote

Anchor this threaded massager to one procurement listing

This black threaded prostate massager follows one Alibaba listing and six repeated product views. Its source fingerprint is a pointed leaf-like body, a field of diagonal wave ridges, a short narrow neck, a broad round safety base with a translucent colour window and a separate white oval remote.

The public image is newly created from visible construction. Supplier photographs remain private procurement evidence while written media permission is pending.

Separate the visible design from the marketplace title

The marketplace title says rotating, while the collected gallery illustrates vibration, a coloured light window and wireless remote use but does not demonstrate a rotating mechanism. The proposed retail page therefore withholds rotation until a production sample visibly and repeatedly proves it.

A changed mechanism, smooth head or different base needs a separate source record rather than a silent substitution.

Measure the pointed leaf profile from approved samples

Record overall insertable length, maximum width, front-to-back depth, tip radius and the location of maximum girth. Photograph the same sample against a scale from both broad faces and both edges so grading does not depend on a perspective rendering.

Supplier artwork labels the device around 90 mm high and the base around 35 mm wide; those figures remain pending physical measurement.

Map every diagonal wave ridge across the broad face

Count the raised channels, document their sweep direction, spacing, crest radius and height, and note where the pattern fades into the smooth lower body. Surface inspection should look for flashing, trapped debris, tears, sharp ridges and asymmetry.

This ridge field is a primary match point. A spiral, straight-flute, pebble, facet or smooth texture is not the selected option.

Cycle the short neck without compromising the safety base

Measure relaxed neck diameter and length, then apply controlled bending and compression cycles while monitoring whitening, cracking, permanent set and separation from the base. The neck should not be used to infer flexibility or retention before these checks.

Any trial requires stop criteria for pain, numbness, bleeding, excessive pressure or loss of external-base control.

Keep the round base externally accessible

The source uses a low, broad circular base rather than a jewel, T-bar or narrow handle. Confirm maximum span, thickness, edge radius and resistance to folding under representative loads before describing it as a safety feature.

Anal-use guidance must require the complete base to remain outside the body. No product should be used when the base is damaged, unusually flexible or difficult to grip.

Verify the translucent RGB-style base window

A round illuminated window appears on the front face of the base in every gallery view. Test whether it shows status, follows operating patterns, cycles colours or can be disabled, and measure surface temperature during the longest intended session.

Colour-changing illumination is a supplier presentation, not a confirmed production promise until multiple received units match.

Test the white oval remote as a separate component

The pictured remote has a small indicator dot, one dark leaf-shaped button and shallow curved grip channels. Record its dimensions, battery type, pairing process, range, response delay, sleep behaviour, accidental activation resistance and whether it controls light and vibration independently.

Supplier artwork labels the remote around 60 by 38 mm. Dimensions and inclusion remain pending the sealed packing list.

Reconcile the claimed ten modes with actual control logic

The supplier title and gallery mention ten vibration patterns. Log every button press from power-on, identify speeds versus patterns, test restart memory, confirm remote and base controls, and compare three samples from the selected production lot.

No ten-mode or intensity statement is guaranteed until firmware, instructions and repeated measurements agree.

Build fit guidance around measured geometry

Fit assessment should use documented fixtures and voluntary adult trials with suitable lubrication, gradual insertion, an accessible base and immediate stop rules. Record ridge pressure, neck position, base contact and movement stability without assuming one geometry suits every body.

This product is not a medical device and no therapeutic, prostate-health or performance outcome is claimed.

Require evidence before any water-exposure instruction

One supplier graphic labels IPX7 and shows water exposure, but the listing does not provide a lot-matched report on the complete assembly. Request evidence and test the seam, control area, light window and any charging interface under the appropriate protocol.

Until validation is accepted, keep the device, remote and charging equipment away from immersion. Cleaning instructions must follow confirmed materials and ingress results.

Confirm every body-contact material by component

Request polymer names, pigments, coatings, adhesives, metals, battery details, restricted-substance records, odour limits and batch traceability for the black body, base, translucent window and remote. Compare hardness, finish, tack and colour across production samples.

Supplier artwork uses silicone and skin-friendly language, but silicone, body-safe, hypoallergenic, latex-free and medical-grade wording is withheld pending evidence.

Document charging and battery behaviour before launch

Identify the connector and supplied cable, then record input voltage and current, polarity, charge time, runtime by mode, standby drain, low-power indication, temperature rise and protection behaviour. Test the remote power source separately.

No cable, adapter, replaceable cell, magnetic lead or battery capacity is included by assumption.

Approve pack size weight and contents from a sealed unit

The listing currently displays a single-package size of 15 by 10 by 6 cm and gross weight of 0.35 kg. These are procurement references, not confirmed product dimensions or final fulfilment values.

The planning pack contains one black device and one white oval remote only. Instructions, charging lead, batteries, pouch and retail box remain excluded until the selected option’s sealed packing list confirms them.

Plan EUR 49.99 with freight and validation still open

The hidden procurement record stores Dongguan Youlanxiang Rubber & Plastic Products Co., Ltd., listing ID 1601895871859, the observed EUR 6.90 reference price, MOQ one piece and the check date. It is not a binding quotation for colour, remote, packaging or production lot.

EUR 49.99 allows provisionally for China-origin freight, electrical and remote checks, material and ingress validation, discreet fulfilment and expected quality loss. Current option price, packed weight, destination freight, duty, tax, payment terms, lead time and final landed cost remain pending.

Frequently asked questions about the threaded massager

Does the device definitely rotate?

No. Rotation appears in the marketplace title, but the collected images do not prove a rotating mechanism; a production sample must demonstrate it first.

Are ten vibration modes confirmed?

No. The supplier claims ten modes, while firmware order, intensity steps and repeatability still require testing.

Is the coloured base light functional?

The gallery repeatedly shows an illuminated window, but colour behaviour, status meaning and production consistency are pending sample checks.

Is the white remote included?

It is shown with the selected option and included in planning, yet the sealed packing list must confirm the final retail pack.

Can it be immersed in water?

Not under current guidance. The advertised IPX7 claim needs lot-matched evidence and a complete-assembly test.

What material is the black body?

The supplier calls it silicone, but exact polymer, pigment, hardness and restricted-substance documentation remain pending.