Detachable Faux-Fur Tail Anal Plug with Flared Base

The base matters more than the tail

A faux-fur tail changes the silhouette of a plug, but it does not change the central safety requirement: the external base must remain wider than the widest insertable section and easy to grasp. Judge the plug by its base span, neck shape, insertable length and maximum diameter before considering color or tail volume. None of those production measurements is confirmed yet.

Detachment creates two inspection jobs

The connector should lock positively without exposing sharp threads, burrs or a gap that can pinch skin. Assemble the two pieces in the hand first. Pull gently in line with the connector, rotate through the intended movement range and confirm that the tail cannot unscrew or unclip under a light accidental tug.

The connector belongs outside the body. It must not reduce the effective width of the flared base, pass through the base or become the only retrieval point. If attaching the tail blocks the base from sitting flat or makes the base difficult to grip, the sample fails the product concept.

Measure the insertable section as a separate object

Supplier photographs rarely establish scale. Record the rounded tip, maximum diameter, taper length, usable neck width, insertable length and base span with the tail detached. Weight also matters: a heavy tail can lever the plug in motion even when the insertable profile appears modest.

Begin only with a plug size already familiar to the user and use abundant compatible lubricant. Advance slowly, never force past resistance, and stop for sharp pain, numbness, bleeding or unexpected discomfort. This page does not classify the unmeasured sample as a beginner size.

Tail movement can magnify connector load

A long faux-fur tail acts like a soft lever. Walking, turning or sitting may place sideways force on the connector and base. Test small movements first on a stable surface, keeping the full base unobstructed and accessible. Do not sit on the connector, trap the tail beneath furniture or pull the tail as a handle.

A tail plug is not suitable for sleep, extended wear, exercise, vehicle use or any situation where access to the base is limited. Keep the session sober and attended; remove the product promptly if the base shifts, the connector loosens or sensation changes.

Clean the plug and the faux fur separately

Detach the tail before cleaning. The plug needs a method matched to its verified base material and finish; those details remain pending, so boiling, bleach, dishwasher heat and long soaking are not assumed safe. Wash only according to the final supplier instructions and dry around the connector before reassembly.

Faux fur can mat, shed or retain moisture at its core. Until fiber and backing instructions are documented, keep the tail piece dry, spot-clean cautiously and avoid saturating the connector end. Comb only when completely dry and store without crushing the pile.

A pre-use check takes less time than detangling the tail

1. Confirm that the plug surface is smooth under bright light.
2. Check that the base has no split, bend or exposed edge.
3. Attach the tail and verify positive connector engagement.
4. Apply a gentle hand pull and rotation away from the body.
5. Detach again and inspect for loosened hardware or trapped fibers.
6. Confirm lubricant compatibility after the plug material is documented.

Discard a sample with a rough seam, peeling finish, cracked base, loose insert, shedding at the connector, corrosion or a fastener that releases unpredictably.

Questions that require sample answers

What is the insertable size?

Insertable length, maximum diameter, neck width and base span remain pending direct measurement.

What is the plug made from?

The selected result uses the word metal, but alloy, surface finish, plating and restricted-substance documentation are unconfirmed.

Is the tail synthetic?

The retail concept specifies faux fur. Fiber type, backing, dye stability, shedding and washing limits require supplier documents and sample checks.

How does the tail attach?

The source says removable, but the production connector type, thread direction, locking method and pull resistance remain pending.

Can the tail be washed under running water?

No water-care claim is made until the fiber, backing and connector instructions are verified.

Is it intended for long wear?

No. The concept requires easy access to the broad base, short attended use and removal at the first sign of discomfort or hardware movement.

Supplier reference and provisional EU display price

The selected Alibaba search result displayed USD 5.00 with a one-piece minimum from Luan Ninghao International Trade Co., Ltd. The planned EUR 39.99 display price provisionally allows for China-origin freight, crush-resistant tail packaging, measurement, connector pull and rotation checks, surface inspection, neutral packaging, payment processing and destination delivery. Freight, duty, tax, insurance, sample fees and all purchasing conditions remain pending confirmation.

Procurement must preserve the exact connector sample

The purchase record must link the quotation, sample and production lot to one exact model. Confirm insertable geometry, base span, plug alloy and finish, connector construction, tail fiber and backing, dye transfer, shedding, cleaning limits, packaging, labels, reports, quantity tiers, lead time, freight, duty, tax and contract terms. No unverified specification should be copied from a visually similar offer.