KRSJJ M696 White/Silver Heated-Base Thrusting Suction Stroker

An exact M696 configuration, not a generic machine listing

This preview traces to Alibaba offer 1601427560959 from Shenzhen Everycom Technology Company Limited. The selected option is White; supplier photography adds silver-grey visual panels, so final housing colour standards must be approved against a production sample before procurement.

The circular display anchors a three-button front panel

The supplier close-up shows a round black LED area above three separate buttons. Icon meaning, long-press timing, indicator states, memory behaviour and accidental-lock operation have not been documented; the sample inspection must map every action before instructions are approved.

Four thrusting modes describe movement patterns, not measured travel

The offer assigns four modes to the powered linear motion. Stroke length, speed range, load response, pause rhythm and whether travel changes with other functions are unstated. No performance number is inferred from the animation.

Four sucking modes need a physical pressure check

Supplier wording separates four sucking modes from thrusting. The mechanism, pressure range, seal dependence and control sequence remain pending hands-on testing, so this page does not translate the word “sucking” into a medical or calibrated pressure claim.

Ten vibration modes form a third control group

The source lists ten vibration modes alongside the two four-mode systems. A production sample should establish whether vibration is independently adjustable, which motor creates it, how combinations are selected and whether the device resumes the previous setting.

Function combinations cannot be assumed from three mode counts

Four thrusting, four sucking and ten vibration modes do not automatically establish 160 independent combinations. The catalogue records each stated count separately until button mapping, simultaneous operation and restart logic are verified.

The soft sleeve appears removable in the exact gallery

The motion graphic shows a separate inner sleeve aligned with the white/silver housing. Removal method, retaining features, included sleeve size, usable channel dimensions, texture geometry and spare-part compatibility are not confirmed.

Fit specifications remain open despite S, M and L illustrations

Another source graphic presents interchangeable sleeve illustrations marked S, M and L, while the live variant selector shows “l”. That evidence does not prove that three sleeves are included or define internal fit; the packing list and measured usable dimensions are required.

Heating is supplied by a separate base

The unit is pictured standing on its own round warming base. That architecture keeps the heat claim distinct from the moving housing, but contact alignment, base power requirements, automatic shutoff and whether heating works only while docked remain unverified.

The supplier graphic states heating up to 42 C

The exact image uses an “up to 42°C” statement. Warm-up time, target tolerance, sensor location, surface uniformity and over-temperature protection are absent, so 42 C is retained as supplier evidence rather than guaranteed retail performance.

USB charging is documented only at a broad level

The page says USB charging without identifying the connector, input voltage, current, cable length or adapter inclusion. Use only the approved low-voltage charging setup after its production specification is confirmed.

Battery capacity and working time are not published

Capacity, full-charge duration, runtime by function, low-battery behaviour and cell transport documents were not visible. Receiving tests should measure charging and operation across motion, suction, vibration and heating use cases.

The material selector and material table describe different scopes

The chosen material selector reads TPE, while the supplier specification table says ABS and TPE. The likely split between soft sleeve and rigid housing must not be treated as verified until grades, hardness, pigments, plasticisers, adhesives and component mapping are supplied in writing.

No product-specific immersion rating is accepted

The exact inspected page did not provide a model-matched ingress report. Keep the powered housing, display and charging interface away from soaking water. Only the removable sleeve should be washed after the supplier confirms removal and cleaning instructions for the production set.

Cleaning depends on what can be safely separated

After powering down, remove only components confirmed as detachable. Wash an approved sleeve with mild soap and lukewarm water, rinse away residue and dry every part fully before assembly or charging. Do not boil, bleach or use abrasive cleaners unless the material documentation explicitly permits it.

Use should begin slowly and without forcing fit

Inspect the sleeve for tears, tackiness, odour or debris, apply a lubricant confirmed compatible with the production TPE and start at the lowest available setting. Stop for pain, numbness, bruising, swelling, excess heat or persistent irritation.

Incoming inspection must test the complete control system

Verify model and colour, sleeve retention, seams, edges, display segments, every button, each of the 4/4/10 stated modes, simultaneous-operation logic, heat stability, charge time, runtime, noise, stall behaviour and shutdown. Segregate units with splitting, sticky surfaces, contamination, unstable motion or abnormal temperature.

Two package descriptions do not match closely enough

Marketing copy states 12.32 × 4.33 × 4.21 inches, approximately 31.3 × 11.0 × 10.7 cm. Separate single-package fields say 30 × 15 × 12 cm and 2.0 kg. Both records are preserved, but master-carton dimensions, units per carton and gross weight need written confirmation.

The 200-unit source value is EUR 3674.00

The live tiers were EUR 18.37 for 20–499 pieces, EUR 17.58 for 500–999, EUR 17.23 for 1,000–2,999 and EUR 15.97 from 3,000. A 200-unit plan therefore uses EUR 18.37 each before freight, duty, VAT, insurance, payment fees and quality loss.

The Portugal logistics snapshot is not a bulk quotation

For 20 pieces, the panel displayed EUR 466.61 and EUR 486.61 without clearly allocating the amounts. Neither number is multiplied or reused for 200 units; a written carton-based freight quotation is required.

EUR 89.99 is a cautious planning price

The preview price includes room for China-to-Portugal transport, battery handling, inspection, discreet fulfilment and expected quality loss. It must be recalculated after the supplier confirms 200-unit freight, tax, Incoterm, lead time, payment, warranty and defect terms.

Frequently asked questions

Which colour is this listing for?

The live selector is White. Silver-grey areas visible in the exact gallery require an approved colour standard.

How many settings does it have?

The source separates four thrusting modes, four sucking modes and ten vibration modes. The exact combination map remains pending a sample test.

Does the device itself heat?

The gallery shows a separate warming base and states up to 42 C. Docking logic, warm-up time and tolerance remain unverified.

Are three sleeve sizes included?

No included quantity is promised. S, M and L illustrations appear in supplier media, but the production packing list is pending.

Can the entire unit be washed under water?

No. A model-specific ingress report was not shown, so the powered housing should be kept away from soaking water.

Is EUR 89.99 the launch price?

It is provisional and will be reviewed after the sample and landed-cost evidence are complete.

Visible for authenticated review, still closed to shoppers

The page is published for internal front-end inspection while anonymous visitors remain behind Coming Soon. Sales stay disabled until the sample, dimensions, sleeve geometry, materials, temperature control, 4/4/10 mode map, battery, charging, cleaning, ingress, pack contents, transport papers, image rights, freight, tax and commercial terms are approved.