Three-Recess Vibration-Damped Grip Wand with Upright Charging Dock

Pair a broad-dome wand with an upright dock

This three-recess vibration-damped grip wand with upright charging dock concept contains exactly one rechargeable wand massager and one separate weighted cradle. The wand presents one broad smooth smoky-plum dome, one short bellows-style neck and exactly three oval recesses along its charcoal handle.

The image establishes visible industrial design only. It does not confirm dimensions, materials, vibration, controls, battery, charging, ingress resistance, sound, heat or production readiness.

Audit the exact two-assembly pack

The planned inventory is one wand and one matching upright dock. Cable, wall adapter, travel case, accessory head, storage bag and other items are excluded unless a final bill of materials adds them.

Record the wand and dock serial or lot relationship, colour match, protective packing, contact protection and any separately supplied power component before retail packing.

Measure the single smooth dome head

Record maximum head width, length, dome radius, surface thickness, seam line and mass. Check the smoky-plum surface for sink marks, contamination, sharp flash, bubbles, dents and uneven finish.

Broad-contact and smooth-surface descriptions follow the visible geometry; softness, body safety and sensory performance remain pending approved material and output tests.

Characterize the bellows-style flexible neck

Measure free length, outer diameter, rib count, angular deflection under stated loads and residual offset after cycling. Inspect both head and handle junctions for gaps, stress whitening, trapped residue and abrupt hard edges.

The neck must not be forced beyond a documented range. Flex angle, cycle life and internal cable protection remain pending engineering validation.

Map exactly three oval grip recesses

Number the handle recesses R1 through R3 from head to base. Record length, width, depth, spacing, edge radius and wall thickness around each pocket.

The recesses are proposed as grip and vibration-isolation features, but ergonomic benefit and transmitted-vibration reduction require controlled comparison against an approved solid-handle reference.

Locate and validate the control interface

No operating buttons or indicators are visible in the concept view. Require front, rear and base technical drawings that identify power, mode, level, lock, status-light and charging controls before publication.

Record actuation force, debounce, wet-hand operation, long-press timing, mode order, memory behaviour and immediate-stop sequence on production samples.

Measure motor output without invented mode claims

Use a calibrated fixture to record frequency, acceleration and displacement at the centre and edge of the dome for every approved state. Repeat at full, midpoint and low battery after thermal conditioning.

Motor count, mode count, pattern count, intensity range, deep-rumble language and load response all remain pending. Do not derive them from housing shape.

Inspect the upright dock geometry

Measure base diameter, mass, footprint, cradle height, opening width, insertion depth and tip resistance with the wand correctly seated. Check the two cradle arms for smooth edges and even support.

The dock should stand on a level dry surface away from basin edges. Stability, anti-slip performance and supported wand orientation remain pending the final mechanical test.

Verify charging alignment and contacts

Document whether charging uses exposed contacts, inductive coupling or another interface; the image does not resolve the method. Measure insertion tolerance, contact pressure, polarity protection and misalignment behaviour.

Confirm that the indicator unambiguously distinguishes charging, full charge, error and no-contact states. Charger type, cable, adapter and regional plug remain pending.

Audit battery and electrical protection

Require cell chemistry, nominal capacity, protection circuit, charge time, operating time at stated loads, low-voltage cutoff, overcharge protection, transport test evidence and shelf-storage instructions.

Capacity, runtime, fast charging, standby time and travel-lock claims are excluded until verified. Stop use for swelling, unusual odour, excessive heat, liquid ingress or damaged charging surfaces.

Confirm every material and contact surface

Identify the dome, flexible neck, handle shell, recess liners, metallic collars, base cap, dock cradle, dock base and internal adhesives. Obtain traceable composition, colourant and applicable restricted-substance records.

Silicone, ABS, stainless steel, skin-safe, hypoallergenic, phthalate-free and certification claims remain pending exact supplier declarations and test reports.

Measure heat, sound and ingress resistance

Record surface temperature at the dome, neck, handle and dock interface during charging and under worst-case operating load. Measure sound pressure at a stated distance and background level for every approved mode.

Waterproof, submersible, quiet and low-heat language remains excluded until the assembled product passes a documented ingress, acoustic and thermal protocol. Keep the dock dry unless its own rating explicitly permits moisture.

Clean the wand without wetting an unverified dock

Disconnect power and clean only the wand surface using the validated mild method for the approved materials. Keep liquid away from charging interfaces and recess cavities unless the final ingress rating and cleaning study allow exposure.

Dry the head, bellows valleys, three grip recesses, base and contacts fully before placing the wand in the dock. Avoid solvents, abrasives, boiling, dishwashers and high heat unless the final instructions permit them.

Set operating boundaries before first use

Inspect the dome, neck, three recesses, base cap and dock before each session. Start at the lowest verified setting, keep the wand external and move the broad head rather than holding concentrated pressure on one area for prolonged periods.

Stop for pain, numbness, irritation, unusual heat, noise change, motor stall, cracking or charging faults. This is not a medical device and no therapeutic outcome is claimed.

Build landed price from rechargeable-wand benchmarks

An Alibaba rechargeable-waterproof-wand category page displayed a mini wand at USD 5.88 to 6.18 with MOQ 1 and a larger rechargeable handheld wand at USD 9.79 to 10.69 with MOQ 1. These are broad procurement references, not this exact three-recess grip or docked construction and not an approved supplier.

The public procurement benchmark supports an EUR 74.99 planning price after provisional allowance for China-origin freight, wand and dock moulding, motor and battery validation, charging tests, electrical and transport checks, discreet fulfilment and handling loss. Exact supplier, quote, MOQ, dimensions, materials, modes, battery, charger, packed weight, freight, duty, tax, certification, payment terms and lead time remain pending.

Frequently asked questions

What is included?

Exactly one wand massager and one separate upright charging dock are planned.

How many grip recesses are present?

Exactly three oval recesses are arranged along the handle.

Is the charging cable included?

The cable, adapter and plug configuration remain pending the final bill of materials.

How many vibration modes does it have?

Motor count, mode count, intensity levels and control sequence remain pending sample testing.

Is the wand waterproof?

No ingress claim is made until the complete production assembly passes a documented protocol; keep the dock dry.

Can the dome head be removed?

The concept shows one fixed head, and no interchangeable head is included in the planned pack.