Four-Strap Scallop-Lace Garter Belt and Thong Set

Pair one scallop-lace belt with one matching thong

This four-strap scallop-lace garter belt and thong set concept contains exactly two smoky-plum and charcoal garments. The belt shows one floral-lace front, a smooth waistband and exactly four adjustable suspender straps, each ending in one clip.

The image establishes visible styling only. It does not confirm graded measurements, fibres, opacity, stretch, strap range, clip hardware, closure, gusset construction, colourfastness or production readiness.

Confirm exactly two garments in the pack

The planned inventory is one garter belt and one thong. Bra, stockings, robe, gloves, jewellery and detached accessories are excluded.

Require the final size and colour codes, fibre declaration, care label and traceable production lot for both garments.

Grade the belt from fixed waistband datums

Measure relaxed and stretched waist, upper-edge length, front height, side height, back height, lace-panel width and lower-hem sweep for every proposed size. State the measuring method and tolerance.

A flat-lay width cannot establish fit, ease or waist placement on an individual wearer.

Map the charcoal floral-lace front panel

Record motif alignment, panel width, openness, mass, stretch and recovery in both directions. Inspect the joins to the plum side zones for seam slippage, puckering, broken yarns and uneven transparency.

Sheer, breathable, soft and skin-friendly language remains pending exact material and performance evidence.

Inspect the smooth plum side zones

Measure each side panel at upper edge, lower edge and centre, then compare left-right symmetry, grain direction, extension and recovery. Document lining, stabilizer and seam allowance if present.

A satin-like appearance does not prove silk, satin weave, fibre content or colourfastness.

Measure every scallop along the lower edge

Record scallop repeat, depth, cut position, stitch density and edge softness from side seam to side seam. Check for clipped motifs, protruding threads, hardened adhesive and local curling.

The decorative edge must remain smooth after bounded stretch and the approved care cycle.

Label all four suspender straps

Number the straps S1 through S4 from left to right. Measure width, free length, adjustment range, elasticity, slider travel, attachment reinforcement and slippage under bounded cyclic load.

Compare the front pair with the outer pair rather than assuming identical ranges from the image.

Verify the four stocking clips independently

Record clip body, loop, insert, lever, coating, opening, closing force, fabric retention and release force for C1 through C4. Inspect burrs, rough mould lines, corrosion and sharp corners.

Compatibility with a particular stocking welt requires controlled fabric tests and cannot be inferred from clip shape alone.

Document the unseen belt closure

The front-view flat lay does not establish whether the final belt uses hooks, sliders, ties, a zip or pull-on construction. Require a rear technical view and component specification.

Measure closure range, engagement, slippage, edge comfort and one-person removal before publishing instructions.

Measure the thong as its own garment

Record relaxed and stretched waist, front rise, back rise, side-strap width, lace-front dimensions, leg-edge extension, gusset length, gusset width and lining coverage.

The thong must carry its own size, fibre and care information if its construction differs from the belt.

Inspect seams elastic and gusset contact edges

Map stitch type, density, thread, allowance and reinforcement at waistband, lace joins, strap roots, thong sides, leg edges and gusset. Test seam slippage and recovery in every material direction.

Reject skipped stitches, needle damage, raw edges, rough thread ends, twisted elastic or bulky seam stacks.

Validate stretch before building the size chart

Measure force-extension curves and permanent set at the belt waist, lace front, side zones, all four suspender straps, thong waist and leg edges before and after conditioning.

Build guidance from approved finished measurements, intended ease and stretch results instead of mapping a supplier letter size directly to retail.

Check colour transfer across plum and charcoal components

Test lace, smooth panels, elastic, piping, thread, lining, labels, sliders and clips for dry and wet rubbing, perspiration exposure, wash migration and storage contact.

Colourfast and non-staining claims remain pending lot-matched results for the final sellable construction.

Clean delicate lace and protect the clips

Follow only the validated water temperature, detergent, agitation, rinse and drying method. Fasten or protect the four clips and any approved closure so they cannot snag the lace or thong.

Bleach, solvents, high heat, wringing, machine drying and direct ironing are excluded unless the exact care study permits them.

Build landed price from a garter-belt benchmark

An Alibaba lace-garter category page displayed one high-waist floral-lace garter belt with thong at USD 3.50 to 5.00 with MOQ 1. It is a broad procurement benchmark only and does not identify this four-strap two-piece construction or an approved supplier.

The public procurement benchmark supports an EUR 34.99 planning price after provisional allowance for China-origin freight, graded samples, lace, side panel, scallop, strap, clip, closure, thong, gusset, seam, stretch, colourfastness and care validation, discreet fulfilment and expected apparel handling loss. Exact supplier, quote, MOQ, sizes, colours, fibres, packed weight, freight, duty, tax, certification, payment terms and lead time remain pending.

Frequently asked questions

How many garments are included?

Exactly two: one garter belt and one matching thong.

How many suspender straps are shown?

Exactly four adjustable straps are visible, each ending in one clip.

Are stockings included?

No stockings, bra, robe, gloves or jewellery are included in the planned pack.

What closure does the belt use?

The rear closure is not shown and remains pending the approved technical specification.

Which sizes will be offered?

The graded size run and finished-garment chart remain pending production samples.

How should the clips be washed?

Use only the validated care method and protect the hardware from snagging the lace and thong.