Black Wolf Telescopic Four-Cuff Spreader Bar Restraint Set

The gallery stays with one exact Black configuration

This page is tied to Alibaba offer 1601674193670 and the first selector labelled Black. Its product view shows one telescopic bar, four padded cuffs, two end rings and three centre attachment rings. The different Black-2 selector is deliberately excluded.

Four detachable cuffs connect around one sliding bar

Two cuffs hang from the end rings and two attach to centre rings in the supplier layout. Snap hooks allow pieces to be detached, but the final packing list must state cuff count, hook count, ring count and every included connector.

The bar is shown telescoping without a stated range

An exact detail graphic labels the bar as freely adjustable and shows two nested tubes with locking points. Minimum length, maximum length, overlap, locking-pin diameter, hole spacing and safe adjustment procedure remain pending.

Padded cuffs use a wrap closure

The cuff close-up shows a soft inner roll, woven outer webbing and a hook-and-loop style wrap. Exact circumference range, width, padding thickness, seam specification and closure engagement length are not supplied.

PU leather is the only declared material

The marketplace lists PU leather but does not separate cuff covering from webbing, padding, thread, hook, ring, coating or bar metal. No leather grade, metal grade, nickel status or restricted-substance evidence is available.

Black is the only storefront choice

Keeping a single selector prevents the alternate Black-2 construction from being mistaken for this kit. Production orders must reference the offer ID, selector screenshot and approved component photograph together.

This restraint set is not suspension equipment

No load rating, weld report, connector rating or structural certificate is supplied. Do not suspend a person, support body weight, pull against furniture, use for impact loading or treat the bar as exercise, medical or safety equipment.

Consent and release planning come before setup

Agree on boundaries, a stop signal and who controls release before any cuff is closed. Keep every connector reachable, maintain verbal and visual contact, and have blunt-tip safety shears available for textile parts.

Circulation must be checked repeatedly

Each cuff should allow a comfortable gap and must not compress a joint. Check warmth, color, sensation, movement and capillary refill frequently. Remove immediately for numbness, tingling, coldness, swelling, pain, color change or panic.

The bar changes leverage as well as spacing

Increasing distance can place more force on shoulders, hips, knees and lower back even when the cuffs feel loose. Begin at a neutral range without pulling, move slowly and never force flexibility or a joint beyond its ordinary motion.

Hooks and rings need a locked-orientation check

Before use, confirm each gate closes fully, every ring lies flat, no cuff webbing is twisted and the telescopic lock cannot release under gentle hand pressure. Burrs, sharp edges, bent gates, cracked coating or loose fasteners require removal from service.

Use illustrations are not load instructions

The supplier graphics show several arrangements, but they do not provide verified limits or safe biomechanics. They are retained only to identify the exact configuration and must not be read as approval for every illustrated position.

Never place a cuff or connector around the neck

This set is catalogued for wrist and ankle restraint. Keep the bar, hooks, rings, chains and cuffs away from the neck, airway, head and front of the throat. Never leave a restrained person alone or asleep.

Cleaning depends on confirmed material compatibility

Until care instructions are supplied, wipe only with a lightly damp soft cloth, keep metal joints dry and air-dry open. Do not soak, machine wash, bleach, heat, oil or use solvent cleaners without sample testing.

The listed package needs a physical check

The offer states one piece per OPP, 20 x 10 x 5 cm and 0.5 kg gross. Because the gallery shows a telescopic metal bar and four padded cuffs, folded dimensions, net weight, carton quantity and carton gross weight must be confirmed before freight planning.

EUR 10.32 is a conservative procurement reference

The live page displays EUR 9.62–10.32 without mapping the selected Black configuration to a 200-piece tier. The higher endpoint is recorded as a planning ceiling, not a supplier quote, before quantity-specific freight and import costs.

EUR 44.99 is a provisional retail plan

The plan allows for China-to-Portugal logistics, clearance, duty and VAT where applicable, bar, cuff, closure, connector and load inspection, discreet packing, payment cost and quality loss. It is not a confirmed landed price.

Frequently asked questions

Is this the exact first Black selector?

Yes. Six offer-linked graphics from that configuration are used; the structurally different Black-2 option is excluded.

How far does the bar extend?

The supplier does not state minimum or maximum length, so adjustment range remains pending sample measurement.

Will the cuffs fit every wrist and ankle?

No universal fit is claimed because usable circumference, width and closure overlap have not been provided.

Can this support body weight?

No. It must not be used for suspension or any load-bearing purpose.

Are the cuffs quick release?

Snap hooks and wrap closures are visible, but release time under tension has not been tested.

What is included?

The selected graphics show one bar and four cuffs with connectors; the signed production packing list remains the controlling document.

Sales opening waits for a production-matched safety sample

Anonymous purchasing remains disabled until procurement verifies exact contents, bar range and lock, cuff measurements, closure overlap, connector operation, static and cyclic load limits, material declarations, edge finish, coating and corrosion resistance, cleaning guidance, warnings, packing, image rights, warranty, compliance files and a written 200-set landed-cost quote.