Black T-Bar Rechargeable Anal Plug

The T-base is a non-negotiable safety feature

The planned plug ends in a broad horizontal base that must remain fully outside the body. Its production width, rigidity and relationship to the narrow neck need direct measurement; the original image communicates the principle without certifying exact geometry.

Reject any sample whose base can fold lengthwise, pass through a test ring representing the maximum body diameter or become hidden when the shaft is seated.

Supplier dimensions need a usable geometry map

The listing reports 130 x 35 mm, but does not clarify total length, insertable length, maximum diameter, neck diameter or base width. Those numbers must be recorded separately from a production sample.

A single overall size does not establish suitability for a beginner or any individual body. Fit decisions should use the measured widest insertable section and the user’s prior experience.

Inspect the full taper before first use

Run clean fingers from the rounded tip to the neck while the product is switched off. The curve should be continuous, with no abrupt shoulder, hard seam, dent or thin coating above the motor.

Flex the neck lightly and inspect where it meets the base. Cracking, whitening, exposed rigid plastic or a base that twists away from the shaft prevents approval.

Begin only with relaxation and generous lubrication

Use a compatible water-based lubricant on the tip and along the insertable surface. Start slowly, pause at any resistance and let the taper advance without force.

Sharp pain, persistent pressure or a feeling that the body is pulling the plug inward means stop and withdraw. More lubricant cannot correct unsuitable dimensions.

The base must stay visible and reachable

Keep the full T-bar outside the body throughout use. Choose a position that allows either hand to reach the base and local control without twisting.

Do not cover the base with tight clothing, a harness or another toy. Never use the plug without a clear retrieval path.

Curvature does not guarantee targeted contact

The concept uses a gentle curve, but internal orientation varies by body and position. Do not force the shaft toward a specific point or use pressure to chase a sensation.

Small external adjustments at the base are safer than deep levering. Stop if movement creates sharp, pinching or one-sided pain.

Learn the local stop command in open air

The supplier claims ten vibration modes, while the production sequence and intensity map remain unverified. Identify power, lowest setting, pattern order and immediate shutdown before insertion.

The local button must remain responsive through lubricant and normal grip. A delayed stop or a unit that starts at maximum intensity fails review.

Motor placement can create a hidden hot spot

Run the sample briefly on a clean surface and check the tip, widest section, neck, base and charging contacts. Uneven heat near an internal motor needs more attention than mild even warmth.

Stop for unusual heat, odor, swelling, motor slowdown or an intermittent sound. Safe continuous runtime remains pending battery and thermal testing.

Charging hardware belongs on the dry base

The magnetic lead in the artwork is a concept detail. Connector polarity, input rating, battery chemistry, capacity, charge time, runtime and included cable require confirmation.

Charge on a dry nonflammable surface with model-matched equipment. Never charge or operate the plug while it is inserted.

Waterproof is a claim, not a cleaning instruction

The supplier page uses full-waterproof wording, but the exact ingress standard and test evidence have not been reviewed. Do not assume the button or charging contacts tolerate immersion.

Until verification, wipe the surface with a lightly damp lint-free cloth and mild compatible cleanser. Keep seams and contacts away from pooled water.

Clean immediately after each session

Remove lubricant and residue from the full shaft, neck and every edge of the T-base. The neck-to-base junction is especially important because residue can collect beneath the wider external section.

Dry with a lint-free cloth and allow the plug to air completely before charging or storage. Persistent odor, discoloration or unreachable residue removes it from use.

Black color does not identify the polymer

The listing calls the product silicone, but exact grade, hardness, pigments, internal plastics and bonding method require supplier documents. Medical or body-safe wording is not adopted without evidence.

Perform a damp white-cloth rub test and inspect the curved surface while flexed. Tackiness, color transfer, cracks, bubbles or layer separation prevents approval.

Test lubricant compatibility before full coating

Apply a small amount of water-based lubricant to a hidden area of the base and wait for swelling, dullness, softening, stickiness or color change.

Oils, silicone-based lubricants, solvents and fragranced cleaners remain excluded until the exact production material supports them.

Movement and extended wear need conservative limits

Use the plug only while awake, sober and able to monitor the base and local control. Do not sleep, drive, exercise or sit in a way that presses the T-bar into tissue.

No model-specific wear time is verified. Begin with brief sessions and remove the product for pain, numbness, bleeding, swelling, discoloration or any change in bowel comfort.

Withdrawal should follow the taper slowly

Switch vibration off, add lubricant around the neck if needed and relax before guiding the base along the same curve used for insertion. Pause if the widest section meets resistance.

Do not pull abruptly or use the charging cable as a handle. Persistent pain, bleeding or inability to remove the product requires prompt medical assistance.

Sharing needs a fresh barrier for each person

Use a new compatible barrier for each consenting adult and each body area, keeping it smooth so it cannot bunch at the neck or cover the base.

Full cleaning and inspection remain necessary. Cuts, lifted seams, exposed rigid parts or damage to the base remove the plug from use.

Store flat without bending the base

After drying, place the plug flat in a breathable pouch with nothing pressing the shaft sideways or folding the T-bar. Keep the cable separate from the insertable surface.

Store away from sunlight, heaters, lint, children and pets. Long-storage charging intervals must follow the final battery document.

Procurement must match model HB17027

The Alibaba page identifies Shenzhen Huifengsheng Technology Co., Ltd., model HB17027 and supplier-reported 130 x 35 mm dimensions. The displayed small-order price is USD 11.81 for 10-49 pieces.

Material, ten-mode and waterproof statements require verification. Freight, duty, tax, insurance, inspection, commercial terms and destination delivery remain pending.

Frequently asked questions

Is this automatically a beginner plug?

No. The reported overall size does not establish insertable dimensions or individual suitability.

Why must the T-base remain outside?

A wide external base prevents the product from traveling completely inside and keeps removal access visible.

Are ten vibration modes confirmed?

They are supplier-reported. Mode count, order and lowest intensity need sample testing.

Can it be immersed for cleaning?

Not until model-matched ingress evidence is reviewed. Conservative wipe-cleaning is the current rule.

Can it be worn while sleeping?

No. Use requires continuous awareness of comfort, sensation and the external base.

Why is the price provisional?

The supplier figure excludes unconfirmed freight, duty, tax, inspection, insurance and destination delivery.