Black Transparent-Window Heated Retractable Automatic Stroker with Orange Display

Match this device to Alibaba offer 1601268574280

This black transparent-window automatic stroker is sourced from the active Alibaba offer by Shenzhen Everycom Technology Company Limited. Its unmistakable identifiers are a tall black housing, a clear front chamber, an orange display and a light strip around the upper cap.

The supplier image is used under permission reported by the site owner. Written commercial-use scope, duration, territory and editing rights remain pending in the procurement file.

Use the clear front chamber as the primary visual fingerprint

The housing exposes a long central mechanism through a smoked transparent window. Several pale transverse rings sit around a clear internal sleeve, while dark textured grip panels run down both sides.

Reject samples with an opaque body, a blue cylindrical drive chamber or a plain cup shell. Those constructions do not match this offer and would overlap with a different automatic-stroker SKU already in the catalogue.

Inspect the orange display and four-icon control strip

The face panel shows an amber segmented display above stacked icons for motion, illumination and power. The supplier photographs also show small temperature and level indicators near the display.

Ask the supplier for a button map, long-press behaviour, mode sequence and error-code sheet. The photographs confirm the interface layout but not the accuracy of every displayed value.

Verify the retractable drive system on a physical sample

The source title describes a retractable automatic mechanism, and the artwork depicts the internal sleeve moving along the chamber. Stroke travel, cycle rate and load behaviour are not yet independently measured.

Run timed tests at every setting, record actual travel with and without load, and check whether speed can be changed separately from vibration. Any published performance figure must come from the approved sample.

Validate vibration modes without relying on artwork alone

One supplier graphic advertises nine vibration modes, but the listing imagery is marketing evidence rather than a test report. Confirm the number of patterns, intensity steps and whether vibration can operate independently.

Record the mode order, memory behaviour and restart state. Treat nine-mode wording as pending until the production sample and final instruction sheet agree.

Measure the heating function and temperature stability

The supplier artwork displays 40 degrees Celsius and 104 degrees Fahrenheit. Those are claimed target values, not a verified surface-temperature result.

Measure warm-up time, stable temperature, overshoot and automatic cut-off with calibrated equipment. Require the supplier to identify the heating zone and provide electrical safety documentation before confirming any temperature claim.

Confirm the sleeve material and internal ring construction

The visible insert is clear with pronounced internal texture and multiple pale support rings. Automated page text mentions TPE, but a product-specific composition declaration has not been supplied.

Request the exact polymer grade, plasticiser information, colourant statement and supplier test documents. Do not describe the insert as silicone, body-safe, hypoallergenic or phthalate-free without matching evidence.

Check sleeve removal, drainage and cleaning access

The source photographs do not clearly show how the transparent insert separates from the motor housing. Confirm whether the sleeve, end cap and support frame are removable and which parts may contact water.

Ask for disassembly photographs and a cleaning procedure. Test reassembly, trapped moisture, drying time and seal wear before writing final care instructions.

Audit the black shell, grip panels and light band

The outer case combines glossy black surfaces with darker textured side panels and a pale translucent cap. A narrow multicolour light band curves across the top edge in several supplier images.

Inspect gaps, scratches, mould lines, window clarity and light leakage. Confirm whether the light effect can be switched off and whether colour behaviour is fixed or mode-dependent.

Confirm charging input, battery and supplied cable

A supplier graphic shows a USB Type-C port and several generic power sources. Battery chemistry, rated capacity, charge time, run time, input specification and cable contents remain unconfirmed.

Obtain the final label artwork, battery transport documents and charging instructions. Test the supplied cable and require overcharge, overcurrent and thermal-protection evidence appropriate to the destination market.

Measure the finished device instead of trusting the graphic scale

One source image labels the unit 10.6 inches long, but width, depth, usable internal length, opening dimensions and net weight are absent from the structured offer.

Measure three approved samples and record tolerances. Packaging design and shipping estimates must use packed dimensions and gross weight rather than a rendered product outline.

Test noise, heat and endurance across a full cycle

A motorised mechanism can generate vibration, drive noise and local heat that static photographs cannot reveal. Measure sound at a defined distance in a quiet room and record temperature during continuous operation.

Complete repeated start-stop and charging cycles, inspect gear wear and check that the clear chamber remains aligned. Agree a failure threshold and incoming-quality procedure before a volume order.

Keep certification and market claims evidence-led

A charging artwork includes small compliance symbols, but an icon on an image is not a product-specific certificate. Request declarations, reports and label files tied to the exact model and factory.

Water resistance, EMC, battery transport, restricted-substance, electrical safety and disposal obligations remain pending. Do not infer certification from the supplier’s company profile or from generic marketing graphics.

Lock the packing list and China-origin freight inputs

The structured offer shows a ten-piece minimum, but the retail box, insert, cable, manual, sleeve accessories and discreet outer packaging are not yet confirmed.

Request one packed sample, carton quantity, gross and volumetric weight, dispatch lead time and destination quote. Freight, duty, tax, insurance, certification costs and defect allowance remain pending.

Plan EUR 89.99 from the observed wholesale tiers

On 10 August 2026 the offer displayed USD 19.19 for 10-499 pieces, USD 18.39 for 500-999, USD 17.99 for 1,000-2,999 and USD 15.39 from 3,000 pieces. The observed minimum is ten pieces.

EUR 89.99 is a provisional retail plan covering China-origin freight, battery handling, electrical and mechanism sampling, discreet packing and quality loss. Recalculate after a current written quotation and packed sample are received.

Frequently asked questions about this automatic stroker

Is the 40 degrees Celsius claim confirmed?

No. It appears in supplier artwork and requires calibrated sample testing.

Does it have nine vibration modes and eight thrust modes?

Those counts are supplier claims pending production-sample and manual verification.

Is the clear sleeve made from TPE?

Automated listing text mentions TPE, but the exact composition declaration is still pending.

Is the device waterproof?

No water-resistance rating has been verified, so only supplier-confirmed removable parts should be washed.

Can the exact source image be traced?

Yes. The public image and private evidence set both point to Alibaba offer 1601268574280.

Is EUR 89.99 the final sale price?

No. It remains a planning price until freight, tax, duty, certification and sample results are known.