Cross-Halter Floral-Lace Longline Bralette and Twin-Wrap-Waist High-Leg Brief Set

Cross the halter line over a longline lace bralette

This cross-halter floral-lace bralette and wrap-waist brief set combines a smoky-plum wireless top with a coordinated high-leg bottom. Two narrow front straps cross once between the triangular cups, while exactly two separate bands cross once above the brief.

The rendering defines style direction only. Fibre content, opacity, stretch, support, dimensions, closures and size range remain pending.

Confirm exactly two coordinated garments

The planned sales unit contains one bralette and one brief. A garter belt, stockings, robe, skirt, harness, choker, pads, inserts, jewellery, hanger and storage pouch are excluded unless an approved packing list states otherwise.

Both wrap bands belong to the brief and both halter straps belong to the bralette; they are not additional pieces.

Draft two wireless triangular cups in mirrored lace

Measure cup base, centre height, side height, apex position and overlap at the bridge. Mirror the floral motif where practical and inspect the seam allowance against the sheer ground so the pair reads as balanced without implying moulded or padded support.

Underwire, foam, removable pads and a specific cup-volume range are not promised.

Cross the front straps once without twisting

Specify the intersection height, strap width, attachment points and allowable movement at the single centre crossover. Check that the left and right straps lie flat under light and moderate tension rather than rolling into a narrow cord.

The crossover is a structural styling detail, not an independent chest harness.

Continue both straps into one halter neckline

Record relaxed and extended neck circumference, adjustment range, closure method and strap-end finish. Fit-test neck pressure, cup alignment and underarm position together because changing the halter length alters all three.

A fixed neck loop, slider, clasp or tie remains pending the approved sample.

Use the charcoal longline band as a stable base

Measure band height at centre and side, relaxed circumference, extended circumference, elastic width and closure overlap. Inspect the seam joining plum lace to charcoal mesh for puckering and slippage after repeated stretch and care cycles.

Support level must be described from fit trials rather than inferred from the wide band.

Shape the brief around one floral-lace front panel

Record front rise, back rise, waist, high hip, full hip, panel width and gusset dimensions for every size. Keep the floral panel centred as the brief is graded and verify that edge binding does not cut across the motif unevenly.

Rear material, seat coverage and gusset construction require a complete sample and cannot be confirmed from the flat lay.

Attach exactly two wrap-waist bands to the brief

Define the left and right anchor points, finished widths, lengths, crossing order and adjustment method. Test whether the bands stay flat through sitting, bending and walking without migrating, twisting or transferring excessive tension into the side seams.

No third waist band or separate belt is included.

Grade the high-leg curve without narrowing the gusset

Measure leg opening, side height, front curve, back curve and binding tension at each size. Check that a higher cut does not reduce minimum gusset width, expose rough seam allowances or create pressure at the band anchors.

Coverage varies with body proportions, so verified garment and body measurements must be published together.

Build a size table from bust underbust waist hip and torso checks

Link bralette sizing to bust and underbust ranges, then link brief sizing to waist and hip ranges. Conduct paired fit sessions because a single set size may not suit every top-and-bottom proportion.

Available sizes, mix-and-match options and tolerances remain pending factory grading and stock planning.

Verify lace mesh elastic binding and thread separately

Request fibre composition, fabric construction, mass, stretch, recovery, abrasion, snag resistance and restricted-substance reports for every textile, elastic, binding and thread. Match documents to the exact plum and charcoal production lots.

Polyamide, polyester, elastane, recycled, hypoallergenic and skin-friendly claims remain withheld without traceable evidence.

Inspect joins strap anchors and any hardware under cycles

Cycle the halter, front crossover, underband, brief waist and both wrap-band anchors at defined loads. Check bartacks, sliders, rings, clasps and strap ends for fray, coating loss, sharp edges or slippage before and after the validated wash sequence.

Hardware composition, nickel status and load limits remain pending.

Check sheerness shade depth and colour transfer

Evaluate both garments over light and dark underlayers in daylight and warm indoor light. Test dry rubbing, damp rubbing, simulated perspiration and washing for lace, mesh, elastic, binding, thread and labels.

Transparency changes with stretch and lighting, so the page must not treat the studio rendering as a universal coverage result.

Set care and wearing cautions from the assembled set

Validate water temperature, detergent, cycle, drying position and storage method on both garments. Protect lace and long straps from hooks, rough surfaces and high heat; stop wearing the set if seams split, bands roll tightly, hardware is exposed or colour transfer appears.

Flammability, chemical, fibre-label and apparel requirements vary by destination and remain pending professional review.

Plan price from lace-set benchmarks and landed reserves

An Alibaba lace bralette set page displayed a two-piece lace set at USD 1.64 to 2.24 with MOQ 1, a crisscross-back set at USD 3.40 to 4.10 with MOQ 2 and an embroidered set at USD 6.53 to 7.47 with MOQ 2. A lace bralette pack page displayed a two-piece set at USD 3.25 to 3.55 with MOQ 3. These are broad category examples, not quotations for this cross-halter twin-wrap design or approved suppliers.

The public procurement benchmark supports an EUR 37.99 planning price after provisional allowance for China-origin freight, graded top-and-bottom samples, crossover and band-anchor testing, textile and colour checks, discreet fulfilment and expected apparel handling loss. Exact supplier, quote, MOQ, sizes, colours, fibres, packed weight, freight, duty, tax, certification, payment terms, lead time and production availability remain pending.

Frequently asked questions about the cross-halter lace set

How many garments are included?

Exactly two are proposed: one longline bralette and one high-leg brief.

Does the bralette contain underwire?

No underwire is proposed, and support performance still requires graded fit trials.

How many wrap bands are attached to the brief?

Exactly two separate bands cross once at the centre front.

Are stockings included?

No. The planned pack excludes stockings, a garter belt and any third garment.

Which sizes will be offered?

The range remains pending separate bust, underbust, waist and hip grading.

Can the set be machine washed?

Only if both assembled garments and all straps, elastics, seams and hardware pass a documented machine-care cycle.