Seven-Channel Sweetheart Overbust Corset with Five-Clasp Busk, Four Detachable Garters and High-Waist Brief

Shape a sweetheart overbust corset around seven front channels

This seven-channel sweetheart overbust corset set pairs one strapless smoky-plum corset with one matching high-waist brief. The visible front is organised by seven charcoal channels, five centred busk clasps, a pointed lower edge and four detachable garter straps.

The image defines the proposed inventory and visible design. Fibre content, support level, sizing and hardware specifications remain pending approved samples.

Keep the sales unit to two coordinated garments

The planned pack contains exactly one overbust corset and one high-waist brief. Stockings, shoulder straps, replacement garters, modesty panel, storage bag, jewellery and care accessories are excluded unless a signed packing list states otherwise.

Each size should be picked and sealed as one matched set, with component counts checked before dispatch.

Grade the sculpted sweetheart neckline without a universal cup promise

Record centre-front height, side height, neckline depth, cup arc and upper-edge length for every size. Test the neckline while standing, sitting and bending so the binding does not roll, gape or press into the chest.

No cup capacity, lift, shaping or support claim is made until graded fittings cover the intended size range.

Map exactly seven charcoal channel positions

Number the visible channels from wearer left to wearer right and publish their spacing, length and internal insert specification. Inspect both ends of every insert for sharp points, migration, twisting or fabric abrasion after repeated flexing.

Channel count describes visible front construction, not a verified steel-bone count; insert material and stiffness remain pending.

Close the centre with five aligned busk clasps

Measure clasp spacing, stem length, eye clearance, opening force and coating thickness. Cycle all five closures together and individually, then inspect for distortion, corrosion, snagging and exposed edges.

The five-clasp layout is proposed for straightforward counting; alloy composition, nickel release and long-term durability require laboratory evidence.

Finish the lower front with one pointed centre hem

Confirm the point depth, binding width and symmetry across graded sizes. The hem should lie flat without concentrating pressure at the centre or lifting at the hips when the wearer changes position.

Rear length, back closure and modesty construction are not inferred from the front-view rendering and remain pending supplier specification.

Attach four narrow garter straps as removable components

Specify two front and two rear attachment points, strap adjustment range, slider grip, clip opening force and tab dimensions. Pull-test every attachment without the brief or corset fabric tearing.

Stockings are not supplied. Compatibility with welt thickness and safe release under tension must be verified before publishing a stocking recommendation.

Pair the corset with one closed-front high-waist brief

The matching brief uses a smoky-plum centre panel and two symmetrical charcoal floral-lace side panels. Grade waist, high hip, low hip, front rise, back rise and leg opening independently rather than scaling a single outline.

Opacity, rear coverage, stretch and recovery cannot be confirmed from the image.

Build a measurement table from conditioned garments

Condition samples before measuring each size flat and under a defined low tension. Publish corset bust, underbust, waist, side height and centre lengths alongside brief waist, hip and rise ranges, with tolerance bands.

Offer fit guidance only after multiple wear trials show where measurements overlap and where customers should size up.

Separate fashion shaping from medical compression

Measure reduction and pressure at several closure settings, then define the intended fashion fit. Stop use if breathing feels restricted or if pain, numbness, tingling, coldness, discoloration, dizziness or skin injury occurs.

This garment is not protective equipment, posture therapy, waist training, pain treatment or a medical device.

Test every edge binding seam and stress point

Inspect the neckline, arm area, upper back, pointed hem, busk tape, channel ends and garter anchors under repeated dressing and movement cycles. Use abrasion and seam-slippage tests that reflect the proposed fabric weight.

Loose inserts, bent clasps, frayed anchors, broken stitching or sharp hardware are stop-use conditions.

Verify fibres colour and surface claims by component

Request composition and mass for the shell, lining, lace, binding, channel tape, elastic, thread and gusset. Test deep-plum dye transfer against dry and damp pale fabrics and check all components after the proposed wash process.

Satin, polyester, elastane, latex-free, nickel-free, hypoallergenic and sustainable claims remain withheld without traceable evidence.

Document brief gusset construction and hygiene handling

Confirm gusset layer count, fibre content, seam coverage and batch inspection method. The brief should arrive dry, clean and individually protected from warehouse handling while remaining part of the same set.

Use is limited to consenting adults. Do not share a worn brief, and follow only the care method validated for the final fabrics and hardware.

Set care storage and pre-wear inspection rules

Detach the four garter straps and close the five clasps before any approved cleaning method if testing supports that sequence. Dry fully away from direct heat, store the corset flat or gently supported and keep hardware from pressing into the lace brief.

Before every wear, check channel ends, clasps, garter clips, binding, lace and gusset. Stop using the set if any sharp edge, dye transfer, loss of elasticity or structural damage appears.

Price from public corset benchmarks plus apparel validation

An Alibaba corset page displayed an underbust category reference at USD 4.54 to 5.81 with MOQ 10 and another satin corset reference at USD 4.36 to 5.63 with MOQ 10. A separate corset-lingerie-set page displayed a lace corset and garter-set category example at USD 5.11 to 5.79 with MOQ 1. These are broad examples, not quotations for this seven-channel two-piece proposal or approved suppliers.

The public procurement benchmark supports an EUR 54.99 planning price after provisional allowance for China-origin freight, graded samples, seven-channel inspection, five-clasp and four-garter hardware tests, lace and gusset checks, colourfastness, discreet fulfilment and expected apparel handling loss. Exact supplier, quote, MOQ, sizes, fibres, inserts, hardware, packed weight, freight, duty, tax, certification, payment terms, lead time and production availability remain pending.

Frequently asked questions about the seven-channel corset set

How many garments are included?

The proposed pack contains one overbust corset and one matching high-waist brief.

How many front channels are visible?

Exactly seven charcoal channel positions organise the corset front.

Are the four garter straps removable?

Removable construction is proposed, but attachment method, adjustment range and release strength remain pending sample tests.

Are stockings included?

No. The planned two-piece inventory excludes stockings.

Does the corset use steel boning?

No insert material is claimed until the supplier provides traceable specifications and production samples are inspected.

Can the set be machine washed?

No care method is published until the final shell, lace, elastic, inserts, clasps and garter hardware complete wash validation.