Three-Band High-Waist Mesh Lingerie Set

Pair a two-overlay bralette with a three-band brief

This three-band high-waist mesh lingerie set concept contains one black wireless bralette and one matching high-waist brief. The bralette shows two adjustable shoulder straps, two smoky-plum triangular overlays and one underbust band; the brief uses three separate plum waist bands above a black mesh body.

The rendering establishes design intent only. It does not confirm size range, fibre content, opacity, support, stretch, hardware, colour accuracy or production readiness.

Confirm exactly two garments in the pack

The planned set contains one bralette and one brief. Stockings, garters, robes, jewellery and display props are not included in the image or sourcing plan.

Final packaging must identify each garment, size, colour, lot, fibre declaration and care label without relying on a shared generic hangtag.

Measure bralette and brief separately

For the bralette, record underbust width, cup height and width, centre-front width, wing length, strap range and clasp positions. For the brief, record waist at all three bands, upper hip, lower hip, front rise, back rise, leg opening and gusset dimensions.

Use a documented low-tension flat method and publish permitted production tolerances beside the final size chart.

Build grading from garment evidence

Compare unstretched and bounded-stretch measurements across every proposed size and colour batch. Track whether the cup overlay, three-band spacing, rise and gusset remain proportionate after grading.

Generic S, M or L labels do not establish fit; exact size availability remains pending graded patterns and samples.

Evaluate the two plum cup overlays

Measure left and right overlay dimensions, seam allowance, lining layers, shade match and light transmission. Check symmetry at the neckline, centre front and underbust edge after controlled stretch and washing.

The visible satin-like surface does not confirm fibre, weave, padding or coverage under body tension.

Inspect the wireless mesh cup structure

Record mesh aperture, direction, gathering, reinforcement and recovery at the cup perimeter. Review whether seams create pressure points or whether the mesh distorts beside the overlays.

Wireless construction does not guarantee comfort or support for every body shape; those outcomes require documented fit trials.

Verify two adjustable shoulder straps

Measure minimum and maximum length, width, elastic recovery and slider holding force for both straps. Cycle the hardware through adjustment and laundering simulations while inspecting anchor stitches.

Reject slider creep, twisted attachment, sharp hardware, elastic cracking or a strap range that changes unpredictably by size.

Check underbust band and clasp

Record band width, stretch, recovery, edge finish, clasp positions and opening force. Confirm hardware stays covered from direct contact and does not catch the mesh during dressing or storage.

Exact clasp material, coating, corrosion resistance and adjustment range remain pending sample inspection.

Measure three high-waist bands independently

Label the brief bands W1-W3 from top to bottom. Measure relaxed width, stretch, recovery, spacing and attachment at both sides, then inspect whether one band carries disproportionate tension.

Three visible bands are a construction feature, not a universal shaping or compression claim.

Inspect mesh body, gusset and leg openings

Map mesh direction, seam placement, piping, leg elastic and gusset layers on front and back. Check the closed side seams and internal surfaces for bulk, loose thread, rough edges or trapped dye.

Gusset fibre, lining, opacity and hygiene construction require documentary evidence and physical inspection.

Test stretch, recovery and seam balance

Cycle the underbust, straps, cup mesh, waist bands, brief mesh and leg openings through bounded extension. Record permanent growth, waviness, skipped stitches, seam slippage and colour-panel distortion.

Set acceptance limits by component and size before approving a production batch.

Run fit and movement reviews by size

Use consenting adult fit models under a documented apparel protocol while keeping public imagery garment-only. Review cup placement, underbust stability, strap pressure, band spacing, rise, gusset alignment and leg movement.

Report observations against measurements rather than promising one silhouette or comfort result for everyone.

Validate colourfastness and care

Run dry rub, damp rub, perspiration-simulant and wash checks on black mesh, plum overlays, three bands, thread, piping and elastic. Record staining, bleeding, shrinkage, distortion and hardware discolouration.

Care instructions must follow verified fabric and trim behaviour; hand-wash, detergent, heat and drying language remain pending.

Plan hygiene-focused packaging

Specify separate protective folding that prevents strap tangling, mesh snagging, clasp abrasion and band distortion. Record packed dimensions, mass, moisture protection, size identification, lot code and inspection seal.

Exact hygiene policy, packaging material and warehouse workflow remain pending supplier and fulfilment confirmation.

Build landed price from a mesh-set benchmark

An Alibaba mesh-lingerie category page displayed one lace and mesh bra set at USD 6.97 to 7.37 with MOQ 5 bags. It is a broad category benchmark only and does not identify this three-band high-waist design or an approved supplier.

The public procurement benchmark supports an EUR 41.99 planning price after provisional allowance for China-origin freight, graded samples, fit review, fibre and dye checks, strap, clasp, three-band, seam, stretch, wash and packaging tests, discreet fulfilment and expected apparel handling loss. Exact supplier, quote, MOQ, sizes, colours, composition, packed weight, freight, duty, tax, certification, payment terms and lead time remain pending.

Frequently asked questions

How many garments are included?

The concept contains exactly one wireless bralette and one high-waist brief.

How many waist bands are shown?

The brief has exactly three separate smoky-plum horizontal bands.

Does the bralette have underwire?

The concept is wireless, but final internal construction requires supplier samples and inspection.

Which sizes will be offered?

The sellable size range and measurement chart remain pending graded patterns and fit approval.

What is the fibre composition?

Exact mesh, overlay, elastic, gusset and thread composition remains unconfirmed.

How should the set be washed?

Final care guidance depends on validated fabric, dye, elastic, clasp and wash-cycle results.