Twin-Sweep One-Shoulder Mesh Chemise and Thong Set

Cut one shoulder across two diagonal lace sweeps

This twin-sweep one-shoulder mesh chemise and thong set concept contains exactly two smoky-plum and charcoal garments. The mini chemise uses one wide shoulder strap, an asymmetric opposite edge and exactly two diagonal floral-lace sweeps; the separate thong repeats the same palette with one lace-front insert.

The image establishes visible styling only. It does not confirm graded dimensions, fibres, opacity, stretch, neckline support, lining, gusset, care or production readiness.

Confirm exactly two garments in the pack

The planned inventory is one one-shoulder chemise and one matching thong. Bra, stockings, garters, robe, gloves, jewellery and detached accessories are excluded.

Require an independent finished-measurement sheet, fibre declaration, care label and traceable lot record for both garments.

Grade the asymmetric neckline from fixed points

Measure the shoulder-side rise, strapless-side rise, front neckline length, back neckline length, underarm depths, diagonal span and upper-edge extension for every proposed size. Mark identical datums on the approved pattern and garment.

A flat lay cannot establish neckline placement, coverage, stability or ease on an individual wearer.

Measure the single shoulder strap

Record strap width, finished length, thickness, elastic force, recovery, seam allowance and anchor reinforcement. Compare inner and outer edges for twisting, curling and uneven tension.

Adjustable and supportive language remains excluded because no slider is shown and load performance is pending.

Validate the opposite strapless edge

Document elastic width, extension, recovery, edge pressure and grip along the descending neckline. Test slippage and rolling on approved fit blocks through movement and conditioning.

Non-slip, stay-put and secure-fit claims require finished-sample evidence and cannot be inferred from the asymmetric cut.

Map the smoky-plum mesh shell

Measure mass, openness, thickness, extension, recovery and permanent set in warp, weft and bias directions. Inspect the shell for snags, holes, skew, hard inclusions and uneven dye.

Sheer, breathable, soft and skin-friendly language remains pending exact fibre and performance documentation.

Inspect the upper floral-lace sweep

Record its start and end points, maximum width, scallop repeat, motif placement, stretch and attachment seam from the shoulder side toward the opposite underarm. Check the join for puckering and seam slippage.

The upper sweep must remain distinct from the lower panel in the approved production reference.

Inspect the lower floral-lace sweep

Measure the lower band from side entry through its diagonal path to the hem exit. Record width variation, motif alignment, edge finish and extension separately from the upper sweep.

Reject clipped flowers, broken yarns, laddering, adhesive residue, rough embroidery and asymmetry outside the approved tolerance.

Control side seams and body taper

Measure bust, waist, hip, side length, centre-front length, centre-back length and hem sweep at rest and under bounded extension. Check left-right side seams for grain alignment, stitch balance and bulk.

Bodycon, shaping and contouring claims remain pending graded fit, stretch and recovery results.

Finish the scalloped lower edge consistently

Record hem wave repeat, amplitude, stitch density and seam allowance around the full circumference. Inspect for curling, loose thread, hardened adhesive and points that could catch on the thong or storage surface.

The lower edge must remain even after the validated care cycle without excessive growth or distortion.

Measure the matching thong independently

Record relaxed and stretched waist, front rise, back rise, side-strap width, lace-insert dimensions, leg-edge extension and back-panel width. Confirm that its colour and motif match the approved chemise lot.

The thong needs its own size and construction record if the mesh or elastic differs from the chemise.

Verify gusset layers and contact edges

Document gusset length, width, fibre content, layer count, lining coverage, attachment stitch and all contact-edge finishes. Inspect the front insert and centre seam for bulk or rough thread.

Cotton, lined, hygienic and moisture-management language is excluded until the exact materials and tests are approved.

Test seams stretch and recovery as one system

Map stitch type, density, thread and reinforcement at neckline, shoulder, underarms, lace joins, side seams, hem, thong waist, leg openings and gusset. Test seam slippage after bounded stretch and care conditioning.

Build the retail size chart from approved finished measurements, intended ease and force-extension data rather than mapping supplier letter sizes directly.

Control colour transfer and delicate care

Test plum mesh, charcoal lace, elastic, binding, thread, gusset and labels for dry and wet rubbing, perspiration exposure, wash migration and storage contact.

Use only the validated water temperature, detergent, agitation and drying method. Bleach, solvents, wringing, high heat, machine drying and direct ironing remain excluded unless the final care study permits them.

Build landed price from a chemise benchmark

An Alibaba lingerie-set category page displayed one sheer mesh chemise nightdress with panty at USD 3.30 to 4.50 with MOQ 3. It is a broad procurement benchmark only and does not identify this one-shoulder twin-sweep construction or an approved supplier.

The public procurement benchmark supports an EUR 39.99 planning price after provisional allowance for China-origin freight, graded samples, mesh, two lace sweeps, asymmetric neckline, seam, stretch, gusset, colourfastness and care validation, discreet fulfilment and expected apparel handling loss. Exact supplier, quote, MOQ, sizes, colours, fibres, packed weight, freight, duty, tax, certification, payment terms and lead time remain pending.

Frequently asked questions

How many garments are included?

Exactly two: one one-shoulder chemise and one matching thong.

How many lace sweeps are on the chemise?

Exactly two diagonal charcoal floral-lace sweeps are shown.

Is the strap adjustable?

No adjustment hardware is shown; the graded strap length and stretch remain pending samples.

Which sizes will be offered?

The graded size run and finished-garment chart remain pending production samples and fit review.

What is the gusset made from?

The gusset fibre, layers and coverage remain pending the approved technical specification.

How should the set be washed?

Follow only the validated care label for the final mesh, lace, elastic, thread and gusset construction.