Purple Double-End Flex-Neck Wand with Bulb Head and Tapered Tip

Trace this double-end flex-neck wand to AV006

This purple double-end flex-neck wand is linked to one live Alibaba offer from Shenzhen Xindeli Technology Industrial Co., Ltd., listing ID 1601427850085. The source identifies model AV006 and offers purple, black and pink colorways.

The public image removes promotional text, diagrams, fruit and use suggestions. It is a procurement match rather than proof of performance or compliance.

Use the two unequal ends as the sourcing fingerprint

AV006 is not a standard single-head wand. One end carries a broad rounded bulb above a narrow neck and metallic collar, while the opposite end continues into a slim curved paddle-like tip.

The handle has three embossed controls positioned near the collar. A straight body, detachable head, two-button panel, separate remote or identical ends indicates another product.

Inspect the broad bulb head before powered testing

Measure bulb height, maximum width, crown radius and the transition into the neck. Examine the full surface under raking light for sink marks, thin coating, mould seams, trapped particles and hard ridges.

Compress the head in a fixture and record recovery at fixed intervals. Approval should stop if the surface splits, delaminates, remains distorted or exposes an internal frame.

Quantify the flexible neck instead of repeating the rotation graphic

The supplier page depicts a 360-degree rotating neck, but that graphic does not define load, angle, cycle life or safe deflection. Measure neutral angle, maximum low-force bend and spring-back without twisting the collar.

Run controlled bend cycles on several samples and inspect the neck-to-head and neck-to-collar joints. Any cracking, whitening, looseness or motor noise change requires investigation.

Check the slim opposite tip as a separate output zone

The lower end narrows into a smooth rounded tip integrated into the curved handle. Record its length, width, thickness, edge radius, flexibility and vibration output independently from the bulb head.

Do not infer function from supplier diagrams. The exact internal motor placement and intended contact zones remain pending an approved sample and written instructions.

Map all three controls by observed behaviour

The physical panel shows plus, central power and minus marks. Document short press, long press and simultaneous press behaviour, then verify startup state, shutdown time, memory and accidental activation.

The source graphic associates the outer controls with different ends, but production firmware can change. The final manual must match the tested lot.

Verify the advertised ten vibration modes end by end

The listing advertises ten vibration modes. Build a matrix showing whether each end operates independently, whether both can run together and which patterns or intensity levels each control selects.

Use an accelerometer fixture to compare repeated samples. Pattern count, amplitude and frequency should remain unverified until the same sequence is reproduced across the approved production lot.

Measure sound with distance and surface declared

The supplier states 40 dB without a complete method. Test each end and combined operation one metre away in a quiet room, first suspended and then resting on soft and hard surfaces.

Record background level, meter weighting and highest stable reading. Only the measured method and range should support later sound language.

Confirm USB charging and runtime on multiple samples

The source states USB rechargeable, two hours charging and more than sixty minutes working time. Obtain input rating, connector type, cell chemistry, capacity, charge indication and battery transport documents.

Cycle several units from empty to full while monitoring temperature, runtime and low-voltage shutdown. Swelling, leakage, damaged contacts, unusual odour or inconsistent charging should block approval.

Require a model-matched report before using IPX7

An IPX7 attribute appears on the listing, but the exact report, laboratory, sample construction and production date are not on file. A marketplace field is not a verified ingress result.

Until matching evidence and sample checks are complete, avoid immersion and keep the charging area dry before connection.

Separate silicone and ABS claims by component

The listing states ABS plus silicone and also uses medical-silicone wording. Request a component bill of materials covering both ends, neck, outer skin, buttons, collar, internal frame, pigments, adhesives and coatings.

Medical-grade, body-safe, latex-free and phthalate-free language is withheld until lot-matched documentation supports every relevant surface.

Plan cleaning around the neck and collar joints

The narrow flex neck and metallic collar create transitions where residue or water may collect. Ask for the approved cleaner, contact time, rinse direction and drying method, then inspect the joints after a controlled soil test.

Do not use boiling, bleach, alcohol, abrasives or dishwashers without explicit material and seal compatibility evidence.

Reconcile product and shipping measurements

The attributes state 42 by 244 millimetres and 240 grams for the device. A separate logistics field shows a 28 by 8 by 10 centimetre package and 0.35 kilogram displayed gross weight.

Confirm measurement points, tolerances, color-box dimensions, cable and leaflet contents, packed weight and master-carton data before freight booking.

Resolve MOQ and customization terms in writing

The active wholesale table begins at two pieces, while another attribute states a one-piece minimum. Treat two pieces as the observed purchasable tier and ask the supplier to confirm sample and production quantities in a dated quotation.

The page also shows color customization from 500 pieces and packaging customization at an added EUR 0.4372 per piece from 500 pieces. Artwork, setup fees, lead time, pack contents and current availability remain pending.

Plan EUR 59.99 from the observed supplier tiers

On 10 August 2026 the page displayed EUR 6.08 for 2-499 pieces, EUR 5.32 for 500-999 pieces and EUR 4.94 for at least 1,000 pieces. Current option price and order availability require confirmation.

EUR 59.99 is a planning retail price allowing for China-origin freight, battery handling, dual-output and flex-cycle testing, surface and joint inspection, material and ingress evidence review, discreet fulfilment and expected electronics loss. Duty, tax and final landed cost remain pending.

Frequently asked questions about AV006

Why is this different from a conventional wand?

It combines one broad bulb head, a flexible neck and a smaller integrated opposite end in one curved body.

Does each end have its own motor?

The control graphic suggests separate operation, but motor count and internal architecture require sample teardown or signed technical documentation.

Are ten modes confirmed?

Ten modes are advertised, yet their distribution between ends and combined behaviour remain pending repeatable testing.

Can it be immersed?

IPX7 appears as a supplier attribute, but a model-matched report has not been reviewed, so immersion is not verified.

What arrives in the box?

The final cable, leaflet and retail packaging contents require a signed packing list and approved pre-production sample.

Why is the order minimum recorded as two?

The live price table starts at two pieces even though another field says one; the conflict is retained for written supplier confirmation.