Black Air-Suction and Vibration Stroker with Removable Sleeve

Trace this black stroker to SZ Magic Love offer 1600314747199

This black air suction vibration stroker is mapped to Alibaba offer 1600314747199 and the supplier display name SZ Magic Love Tech Limited. The offer identifies the model as new-air sucking masturbator and shows the same black shell, white removable sleeve and transparent blue centre used in the catalog image.

The site owner reports permission to use supplier media. Written scope covering commercial use, territory, duration and editing remains pending upload.

Match the production sample to the exact black housing

The supplier gallery presents a matte black outer shell with ribbed grip zones, a pale removable insert, a side charging port and a raised three-button control group. These visual checkpoints matter more than a generic colour label when approving a batch.

Compare the approved sample against all six retained offer images. Reject substitutions that change the shell seams, insert flange, control layout, charging location or transparent centre without written revision details.

Separate the air-suction function from ordinary vibration

The offer describes two kinds of stimulation: changing air pressure around the sleeve and vibration through the handheld body. The gallery uses airflow graphics, but an image cannot establish pressure range, pulse timing or how evenly the sleeve contracts.

Test suction and vibration independently before describing their behaviour. Record whether either function can run alone, how quickly each stops and whether the sleeve shifts inside the housing at higher settings.

Resolve the supplier mode-count conflict

The Alibaba key attributes state three suction modes and four vibration modes. One exact gallery card states three suction and three vibration modes, while supplier description text states five suction modes, ten vibration modes and two motors.

These claims cannot all describe the same production revision. The public listing therefore avoids a mode count until SZ Magic Love supplies a signed specification and an approved sample reproduces the full control sequence.

Measure the 220 millimetre body and 148 millimetre sleeve

The offer lists an overall size of about 220 by 65 millimetres and an insertable depth of 148 millimetres. A dimension image shows a 65.48-millimetre body width, a 148-millimetre sleeve and a 25-millimetre opening reference.

Confirm every dimension with the actual sample, including relaxed aperture, stretch range, internal depth, flange diameter and usable channel. Do not convert the supplier diagram into a fit guarantee.

Inspect the removable sleeve before accepting a batch

The exact images show the white insert being pulled from the black housing for separate cleaning. Check that the flange seats evenly, the sleeve does not twist around the drive and the removal process does not tear thin edges.

Document the correct orientation and reassembly steps. A removable component is useful only when customers can reinstall it without pinching, misalignment or contact with internal electronics.

Keep material claims behind written evidence

The supplier page uses soft and flexible material language, but the accessible record does not identify the exact sleeve polymer, hardness, housing resin, colourants, plasticisers, adhesives or batch traceability.

Request component-level composition and current restricted-substance documents tied to this model. Medical-grade, hypoallergenic, latex-free, phthalate-free and certification language must remain outside the sales promise unless named evidence supports it.

Verify USB charging and the electrical limits

An exact gallery image shows a cable entering the side of the device and depicts charging from a power bank, wall adapter, computer or vehicle adapter. The page does not confirm input voltage, current, connector type, battery capacity, charge time or runtime.

Approve only the tested cable and power specification. Keep the charging area dry, never use the product while connected to power and stop if the shell, cable or connector becomes unusually warm.

Correct the impossible package dimensions before freight planning

Alibaba lists a single gross weight of 0.900 kilograms but also lists a one-by-two-by-three-centimetre package. That carton could not contain a device described as roughly 220 millimetres long.

Obtain net weight, packed weight, retail-box dimensions, carton quantity and master-carton measurements in a signed quotation. Freight and margin calculations must not use the contradictory package field.

Map the top controls and emergency stop behaviour

The supplier images show three controls on the rounded top and additional moulded details along the grip. Button icons are not enough to prove power logic, long-press behaviour, memory, lockout or instant stop.

Create a control card from the approved sample. Every operating state should have a fast, reachable stop action, and the device should be tested again at low battery to catch changes in pressure or shut-down behaviour.

Begin with low pressure and short sessions

Apply compatible lubricant after material compatibility is confirmed, begin at the lowest verified setting and keep the controls within easy reach. Air-pressure changes should never be treated as a reason to force the device or continue through discomfort.

Stop for pain, numbness, bleeding, irritation, unusual swelling, loss of control or persistent pressure after power-off. This product is not a medical device and is not intended to diagnose, enlarge or treat any part of the body.

Clean the sleeve apart from the powered housing

Remove the insert only as the verified instructions allow. Wash the sleeve with a gentle method compatible with its confirmed polymer, paying attention to the channel, flange and any recessed texture.

Wipe the powered housing without flooding seams or the charging port. Dry both parts completely before reassembly, charging or storage, and do not place an unverified component in boiling water or a dishwasher.

Check lubricant, sharing and storage compatibility

Choose lubricant only after the sleeve formulation is confirmed and spot-test when the lubricant maker recommends it. If the device is shared, use an appropriate barrier and cleaning plan for the verified material.

Store the clean, dry sleeve without compression and keep the powered housing away from heat, direct sun, sharp objects and reactive materials. Retire either component if it develops tears, tackiness, swelling, colour transfer, odour changes or damaged seams.

Plan EUR 59.99 from the current Alibaba tiers

On 10 August 2026 the offer displayed USD 18.90 for one to twenty-nine pieces, USD 17.64 for thirty to five hundred and USD 16.38 from five hundred and one pieces. The displayed lead time was seven days for up to five hundred pieces.

EUR 59.99 is provisional and includes planning space for China-origin freight, a sample, electrical and material review, quality checks, discreet packaging, payment processing and destination delivery. Recalculate after corrected carton data, freight, duty, tax, Incoterm and quality-loss allowance are confirmed.

Use a purchase-order sample gate

Before approving inventory, match the exact housing and sleeve, reproduce every button sequence, measure suction behaviour and vibration, inspect motor heat, time charging and runtime, and repeat sleeve removal and cleaning cycles.

Require the supplier name, offer ID, model, colour, production revision, quantity, unit price, included cable, packaging, documents, inspection standard and corrective-action terms on the purchase order. Any substituted revision needs a new sample review.

Frequently asked questions about this Magic Love stroker

Is the catalog image tied to the procurement page?

Yes. It is an exact image linked from Alibaba offer 1600314747199, not a generated look-alike.

Who supplies this model?

Alibaba displays SZ Magic Love Tech Limited and model new-air sucking masturbator. Legal registration and factory role remain pending written verification.

How many suction and vibration modes does it have?

The page contains conflicting 3/4, 3/3 and 5/10 claims. No final count will be promised until a signed specification and sample agree.

Can the white sleeve be removed?

The exact supplier gallery shows removal for cleaning. Durability, correct orientation and safe cleaning steps still require sample validation.

Is the 0.900-kilogram packed weight reliable?

It is a supplier field, but the accompanying package dimensions are impossible. Both weight and carton measurements need written confirmation.

Is EUR 59.99 the final selling price?

No. It is a pre-launch planning price pending quotation, corrected freight data, duty, tax, evidence review and sample acceptance.