Three-Size Collapsible Care Funnel Set with Hanging Ring

A compact funnel can make an approved transfer easier to control

The collapsible care funnel set concept offers three inlet sizes for moving a product-care liquid into a clean compatible container when the formula maker expressly permits decanting. Stepped walls expand for use and compress for storage, while distinct colors help keep a chosen funnel assigned to one defined task.

The set is a pouring aid, not permission to repackage any cleaner.

Decant only when the original label allows it

Many formulas should remain in their supplied bottle with its hazard, batch and expiry information. Before using a funnel, confirm that the maker allows transfer, identify the approved receiving container and copy every required label immediately.

Never transfer a substance simply to make storage look neater, and never combine remnants from different bottles or lots.

Keep every funnel away from the body and intimate use

These funnels are external care tools. Do not wear, insert or place them against skin, and do not use them to introduce liquid into a body opening or into an intimate product. They are not dosing, irrigation, medical or personal-lubricant applicators.

Keep the narrow spout away from valves, motors, charging ports and internal cavities.

Inspect the accordion walls before expansion

Open each fold slowly under good light. Reject a funnel with a split crease, pinhole, rough seam, tacky patch, embedded particle, discoloration, strong odor, warped spout or damaged hanging tab.

Check both sides because a defect hidden inside a collapsed fold may only appear after the body is fully extended.

Select by the receiving opening rather than color alone

Choose a spout that sits inside the container mouth without sealing it, scraping the rim or dropping below a fill line. The inlet should remain large enough for a slow stream without overflowing the bowl.

If no size rests securely while leaving air a way to escape, use a different transfer method approved by the formula maker.

Assign one funnel to one compatible formula family

Color separation can support a written care system, but color does not prevent cross-contact. Mark the storage location or record card rather than writing on an unverified funnel surface, and keep each tool with the formula it has been qualified to handle.

Do not move a funnel between cleaner, lubricant, oil, fragrance or another chemical category.

Prepare a clean receiving container and secondary tray

Confirm that the container is dry, chemically compatible, undamaged and intended for the selected formula. Place it upright in a stable tray on a level nonporous worktop, then clear cables, food, personal items and unrelated bottles from the area.

A funnel cannot make a weak cap, unsuitable plastic or unlabelled bottle safe.

Expand every fold fully before the first pour

Support the base flange and lift the spout until each accordion step is evenly open. A half-inverted fold can trap liquid, change the outlet angle or spring outward while the user is pouring.

Do not stretch, twist or heat the body to force a shape, and keep the hanging ring detached during transfer.

Stabilize the funnel without pushing it into the neck

Seat the spout lightly and hold the outer tab or flange with a clean dry hand. Avoid pressing down because flexible material can deform into a seal, block displaced air and cause the incoming stream to rise unexpectedly.

Keep the receiving container visible throughout the task rather than wrapping a cloth around the neck.

Pour a small measured stream and watch the liquid level

Open only one source container, keep its label facing the user and pour below the tested flow rate. Pause before the receiving level approaches the spout, allow the funnel to drain, then close both containers promptly.

Never leave a source bottle balanced upside down in the funnel and never walk away during transfer.

Stop when flow, color or surface feel changes

Swelling, softening, whitening, staining, persistent odor, sticky texture or slow drainage may signal incompatibility or residue buildup. Set both containers upright in the tray and follow the formula maker’s spill or isolation guidance.

Do not continue just because the funnel has not visibly leaked.

Cleaning instructions must match the selected construction

Rinse or wipe the funnel only by a method validated for its exact material and the substance transferred. Hot water, steam, dishwasher cycles, alcohol and household detergent can each damage some polymers or leave a residue that affects the next use.

Until testing is complete, no dishwasher, boiling or sterilization claim is made.

Dry the hidden folds before collapsing the body

Place the cleaned funnel fully expanded on an approved drying rack so air can reach every crease and the narrow spout. Inspect with good light and wait until no droplet, film or odor remains.

Collapsing a damp funnel can hold moisture between folds and conceal residue from the next pre-use check.

The hanging ring organizes dry funnels but does not seal them

Thread only clean, fully dry funnels onto the ring after confirming that the tab and ring edges are smooth. Store the set in a ventilated private cabinet away from dust, direct sun, heat, ozone and open chemical containers.

The ring is not a child lock, tamper seal or sanitary barrier, and it should be removed before any funnel is used.

The supplier reference supports sample planning only

An Alibaba listing from Cixi Bakejoy Rubber Products shows foldable funnels at USD 0.17-0.20 per piece with MOQ 1000 pieces. Exact sizes, material grade, pigments, ring inclusion, cleaner compatibility and packaging require written confirmation and sample tests.

The procurement reference is not a purchase commitment. The EUR 8.99 three-size plan allows for China-origin freight, size sorting, leak and odor screening, ring assembly and discreet packing; packed mass, freight, duty, tax, insurance, payment fees and destination terms remain pending.

Frequently asked questions

Can any toy cleaner be moved through these funnels?

No. Both decanting permission and material compatibility must be confirmed for the exact formula.

Why are there three sizes?

Different receiving openings may need different spout and inlet dimensions, which still require sample measurement.

Can a funnel stay in the bottle as a spout?

No. Drain it, remove it and close the correctly labelled container immediately after an approved transfer.

May I collapse a funnel while it is damp?

No. Keep every fold expanded until the tool is fully dry and visually clean.

Does the metal ring make storage sanitary?

No. It only groups dry tools and does not block dust, vapor or handling contamination.

When should the funnel be discarded?

Remove it from service after a split, pinhole, permanent deformation, tackiness, strong odor, staining, rough edge or failed compatibility check.