Three-Size Six-Facet Teardrop Anal Trainer Set with Curved Shield Bases and Graded Marker Dots

Progress through three six-facet teardrop trainers

This three-size six-facet teardrop anal trainer set proposes one small, one medium and one large non-powered piece. Each combines a rounded faceted body, a narrowed neck and a curved shield base, while one, two and three raised marker dots identify the progression without printed labels.

The rendering establishes inventory and geometry only. Dimensions, materials, hardness, finish and safe-use limits remain pending physical evidence.

Keep the inventory to exactly three complete pieces

The planned box contains one small, one medium and one large trainer. A storage case, lubricant, cleaner, applicator, guide, vibration module and spare base are excluded unless an approved packing list adds them.

Each piece is a single integrated form with no detachable internal component.

Round the tip before the six longitudinal facets begin

Measure tip radius and the transition into all six faces using production samples. Inspect every rounded edge for mould lines, flash, pits or local hardness changes that could create concentrated pressure.

No sharp polygon edge is intended, and the finished profile must be assessed rather than inferred from the rendering.

Define six softly edged faces on every teardrop body

Record face width, edge radius, maximum width position and cross-section at several heights. Compare the small, medium and large versions to confirm that the progression is intentional rather than a simple uncontrolled scale-up.

Exactly six faces are proposed per piece; texture intensity and sensation claims are withheld.

Narrow each neck before the safety shield

Publish neck diameter, neck length and the radius into both body and base. Bend and torsion tests should check whether the neck collapses, tears or creates a hard hinge after repeated use and cleaning.

Minimum neck dimensions and safe load limits remain pending qualified risk review.

Make every curved shield base wider than its body

Measure base width, depth, thickness, curvature and edge radius for all three sizes. The widest base span must exceed the corresponding maximum body width with a documented margin, and the shield must resist folding through under foreseeable loads.

A narrow decorative foot is not an acceptable substitute for the proposed broad safety geometry.

Use one two and three raised dots as tactile identifiers

The small base carries one dot, the medium base two and the large base three. Confirm marker diameter, height, spacing and bond so the dots remain readable by touch without detaching or creating a cleaning trap.

The dots indicate sequence only; they do not certify dimensions or skill levels.

Publish an evidence-based progression table

For each size, list total length, insertable boundary, maximum width, tip radius, neck dimensions, base span and mass. Calculate both absolute and percentage gaps between adjacent sizes after measuring multiple samples.

Do not describe any step as beginner, intermediate or advanced until the dimensions and risk guidance have been independently reviewed.

Set conservative insertion and removal guidance

Use only after confirming that the item is intact, clean and compatible with the selected lubricant. Move slowly, never force progression and keep the broad shield outside the body and immediately accessible.

Stop at once for pain, bleeding, numbness, unusual pressure, dizziness, loss of control or difficulty removing the item. Seek urgent medical help if a piece cannot be removed or an injury is suspected.

Withhold sharing and extended-wear claims

No duration or continuous-wear recommendation is made without product-specific risk assessment. The set is not intended for sleep, intoxicated use or situations where sensation and judgement are impaired.

Do not share a used item without an appropriate barrier and a validated cleaning process. Consent and clear communication are required for any partnered activity.

Verify composition hardness pigments and seams

Request traceable composition, hardness, pigments, additives, curing records and restricted-substance documentation for the plum bodies, charcoal necks, bases and marker dots. Test whether the apparent colour boundary is a moulded bond, coating or separate material junction.

Silicone, latex-free, phthalate-free, hypoallergenic and body-safe claims remain withheld without documentary and sample evidence.

Match cleaners and lubricants to verified materials

Run compatibility tests with each proposed cleaner and lubricant, checking swelling, tackiness, staining, cracking, hardness change and marker loss. Include repeated exposures and full drying cycles rather than a single wipe test.

No universal lubricant or disinfection claim is made.

Clean facets neck recesses bases and marker edges

Follow only the validated temperature, detergent and immersion limits. Wash all six faces, each rounded edge, the narrow neck, both sides of the shield and around every raised marker, then rinse and dry completely.

Discard any piece that develops tears, permanent distortion, tackiness, colour transfer, odour, loose markers or an edge that can be felt as sharp.

Store the three sizes separately after inspection

Keep each clean dry piece away from direct heat, sunlight, dyes and incompatible materials. Separate contact surfaces if migration testing has not shown that the plum and charcoal components can remain together in storage.

Recheck the neck and shield before each use; never rely on the marker count alone when selecting a size.

Price from three-piece category references and landed reserves

An Alibaba adult-anal-plug page displayed a three-piece category example at USD 0.60 to 3.25 with MOQ 3. This is a broad reference, not a quotation for the six-facet shield-base design or an approved supplier.

The public procurement benchmark supports an EUR 39.99 planning price after provisional allowance for China-origin freight, three separate mould sizes, six-face finishing, shield safety checks, 1/2/3 marker inspection, material and compatibility testing, discreet fulfilment and expected quality loss. Exact supplier, quote, MOQ, dimensions, composition, hardness, packed weight, freight, duty, tax, certification, payment terms, lead time and production availability remain pending.

Frequently asked questions about the faceted trainer set

How many pieces are included?

The proposed inventory contains exactly three complete non-powered trainers in small, medium and large scales.

What do the raised dots mean?

One, two and three dots distinguish the proposed sequence; exact measured sizes remain pending.

Are the bodies sharp-edged?

No sharp edge is intended, but every facet radius and surface transition requires physical inspection.

Are the bases flared?

Each proposed curved shield is wider than its matching body, subject to dimensional and fold-resistance verification.

What material are they made from?

No material claim is made until composition, hardness and production samples are verified.

Can all three use the same cleaner?

Only if final materials and colour junctions pass the same cleaner-compatibility process.