Six exact variants, not a recolored placeholder
BR-NX0189 combines Black or Red shells with A Spiral, B Raised Dots or C Segmented sleeves. Every combination has its own exact supplier selector image and separate stock-managed SKU.

The open-ended shell is built around airflow
The sleeve is open at both ends and sits inside a transparent outer shell. The supplier illustrates air moving along the annular space; airflow resistance, seal behavior and the effect of grip pressure still require sample testing.
A removable egg supplies the vibration
The small red module is shown at the closed end of the sleeve and has its own power control. Motor type, pattern count, amplitude, battery chemistry, charge input and runtime are not published reliably and remain pending.
A Spiral uses alternating ridges and bulb textures
Style A combines diagonal ridges, rounded chambers and small raised points. The exact Black and Red images show the same nominal insert geometry, but production tolerance and firmness must be compared physically.
B Raised Dots changes the contact map
Style B uses longer channels with regularly spaced rounded points and larger bulbs toward the lower sleeve. This page treats it as a distinct texture, not a color-only variation.
C Segmented uses stacked zones
Style C divides the passage into short textured sections with rings, knobs and raised dots. The supplier does not provide internal diameters for any style, so no tightness ranking is promised.

The supplier lists 180 by 70 millimetres
An exact panel marks the assembled product at about 180 mm tall and 70 mm wide, with the sleeve around 155 by 63 mm and a 28.5 mm opening marker. These are supplier graphics awaiting measurement on all six production variants.

Weight values conflict by twelve grams
The offer lists both 270 g and 282 g without mapping either figure to manual, vibrating, color or texture variants. Each finished unit and retail pack must be weighed before freight is calculated.
The shipping carton data cannot be accepted
A 5 x 5 x 10 cm single-package field is shorter than the listed 18 cm product. It is recorded as inconsistent and excluded from landed-cost planning until the supplier supplies a corrected packing list and carton specification.
TPE is supplier-declared, not independently graded
The selector names thermoplastic elastomer. Exact grade, additives, oil content, odor limits, hardness, colorants, restricted-substance results and the rigid shell material remain pending; no medical-grade or hypoallergenic claim is made.
Waterproof wording lacks an ingress standard
The offer uses waterproof and 100% waterproof language but gives no IP rating, depth, duration or model-matched report. Keep the vibration module and charging interface away from immersion until validated instructions are approved.
Use lubricant and start with the module off
Apply a compatible water-based lubricant to the sleeve, insert gently without forcing and only then test the lowest vibration setting. Stop for pain, numbness, loss of color, swelling, skin damage or unusual heat.
Open ends still need careful cleaning
Remove the vibration egg and sleeve only if the production manual confirms that sequence. Wash the non-electrical sleeve according to verified instructions, rinse away residue from every texture and dry completely before reassembly.
Assign the sleeve to one user
Porousness and sanitization performance have not been established. Do not share the sleeve; replace it if it tears, becomes tacky, changes odor, traps residue or cannot be cleaned fully.
EUR 2.19-3.94 is only the visible offer range
The page does not expose a trustworthy 200-piece price for each vibrating color-texture combination. The exact six-style quotation, sample price and color allocation remain procurement conditions, not confirmed costs.
EUR 29.99 is a provisional retail plan
The plan allows for freight, clearance, duty and VAT where applicable, six-variant inspection, charging and motor checks, TPE and ingress evidence, discreet packing, payment cost and expected quality loss. Recalculate after samples and a written quotation.
Frequently asked questions
Which variants are sold on this page?
Only the six vibrating variants: Black or Red with A Spiral, B Raised Dots or C Segmented texture.
Are manual versions included?
No. Manual versions appear on the supplier offer but are deliberately excluded from this product and its inventory.
How large is the opening?
The supplier graphic marks 28.5 mm, but stretch range and usable internal dimensions require sample measurement.
Is the egg rechargeable?
A USB charging graphic appears in the offer, but connector type, battery specification, charge time and runtime need written confirmation.
Can the whole product be submerged?
No immersion promise is made until a defined ingress rating and model-matched report are verified.
Do the three sleeves feel equally firm?
Firmness and compression are not documented, so the texture names describe geometry only, not intensity.
Sales opening waits for production evidence
Anonymous purchasing remains disabled until samples confirm all six variants, dimensions, stretch, motor map, charging, battery, ingress, TPE and shell materials, cleaning, accessories, pack data, CE and RoHS documents, image rights, Incoterm, freight, tax, lead time, warranty and defect terms.
| Color | Black, Red |
|---|---|
| Texture | A Spiral, B Raised Dots, C Segmented |
| Supplier model | BR-NX0189 |
| Supplier-listed material | TPE; grade and rigid shell material pending |













Reviews
There are no reviews yet.