Purple Precision-Ball G-Spot Stimulator Pen

Trace this purple stimulator pen to model PL-VR366

This purple precision-ball G-spot stimulator pen is tied to one Alibaba offer from Shenzhen Pleasure Factory Co., Limited, listing ID 1600358650067. The live listing identifies model PL-VR366, purple and rose-red variants, and an order threshold of ten pieces.

The retail image removes supplier branding and marketplace graphics while preserving the procurement fingerprint. It does not establish unseen specifications.

Match all five visible identifiers before purchasing

The reference design combines a long tapered purple handle, a recessed vertical control panel, one circular front button, an angular shoulder and a polished narrow neck ending in a small purple ball. Those elements should be checked together, not as isolated similarities.

A generic bullet, wand or pen with a different head, shoulder or control layout is not interchangeable with this SKU.

Understand what the precision-ball profile changes

The small spherical contact is intended for users comparing concentrated contact with broader massage heads. Actual pressure feel depends on tip diameter, firmness, neck deflection and motor placement, all of which need measurement on an approved sample.

No therapeutic, diagnostic or guaranteed response claim is attached to the focused shape.

Measure the metal-look neck before defining use guidance

Inspect the narrow neck for exposed joints, plating consistency, sharp transitions, flex, deflection under controlled load and heat transfer during extended operation. The supplier image alone cannot identify the underlying metal, coating or structural core.

Any internal-use guidance should wait for dimensional drawings, seam inspection, load tests and confirmed material declarations.

Verify the tapered grip with dry and damp handling trials

Record handle length, maximum width, taper angle, mass and centre of gravity. Test whether the smooth sides remain controllable and whether the front switch can be pressed without changing hand position.

The source page states 17.6 by 2.6 centimetres, but production tolerances and the precise measurement points remain pending sample inspection.

Map the single-button interface from power-up to shut-down

Document long-press and short-press actions, sequence order, indicator behaviour, memory, lockout and the time needed to stop the device. Repeat the test after charging and after a low-battery warning.

The marketplace page mentions ten frequencies. The exact waveforms, intensities and sequence are not published here until verified with the current production sample.

Record output at the ball tip rather than the handle

Measure displacement, frequency and acceleration at the contact ball and at the grip across each setting. A small head can transmit output differently from a broad wand even when the motor sounds similar.

Claims such as powerful, quiet or deep are withheld until repeatable instrument readings and a multi-unit comparison are available.

Audit sound in a consistent room

Measure A-weighted sound at fixed distances over a controlled background level, then note surface resonance on a soft pad and a hard counter. Supplier wording lists 50 dB, but distance, mode and test method are not stated.

The retail page therefore treats sound as pending rather than converting a marketplace field into a promise.

Confirm battery charging and cable configuration

Identify cell chemistry, rated capacity, input voltage, connector, cable length, charge time, operating time and low-voltage behaviour. Inspect the charging interface for alignment, contamination and strain.

USB rechargeable appears on the source listing; the exact cable, adapter exclusions and dry-charging instructions must come from the approved packing list and manual.

Separate an IPX7 listing field from verified ingress evidence

Request the complete test report, laboratory, date, standard, model mapping and closure configuration. Examine the button membrane, charging interface, shoulder seam and neck joint before and after repeated cycles.

No waterproof claim is made here until PL-VR366 is matched to valid evidence and production samples pass inspection.

Confirm every body-contact material by component

Collect declarations for the purple outer body, ball tip, neck, coating, adhesives, seals, button and cable. Supplier terms such as silicone, latex-friendly or realistic touch are not enough to establish composition or restricted-substance status.

Body-safe, medical-grade, latex-free, phthalate-free and hypoallergenic language remains withheld pending lot-matched documents and sample checks.

Define the box contents and retail unit

The planning unit is one powered purple PL-VR366 device. A charging cable, storage pouch, cap, instruction leaflet and retail box are not included in the sellable promise until the sealed sample and current quotation agree.

The source page lists box or OEM packaging and a single packed size of 23.5 by 11 by 8 centimetres at 0.43 kilograms; those logistics fields require carton verification.

Inspect production samples for concentrated-contact risks

Check ball attachment, neck alignment, shoulder seams, burrs, coating wear, loose parts, unintended activation and heat. Cycle multiple samples through every setting while monitoring the handle, neck and tip.

Any cracked joint, unstable ball, exposed edge, uncontrolled heating, electrical odour or intermittent control should trigger quarantine and supplier investigation.

Plan the landed cost from a live factory reference

The supplier page displayed EUR 5.38 for 10–199 pieces, EUR 5.27 for 200–999 and EUR 5.17 from 1,000 pieces on 10 August 2026. The exact purple option, quotation validity, payment terms, defect allowance and sample charge remain pending written confirmation.

EUR 39.99 is a planning retail price allowing for China-origin freight, 0.43-kilogram listing weight verification, material and ingress review, charging and output tests, discreet fulfilment and expected quality loss. Duty, tax, destination freight, packing changes and final landed cost are still pending.

Review evidence before the product becomes orderable

Purchase approval requires a current pro-forma invoice, color-specific sample, component bill, packing list, battery documents, ingress evidence, substance declarations and production lead time. Image permission should be retained separately from product compliance evidence.

The storefront remains in pre-launch preview; inventory 200 is a planning quantity rather than proof of physically received stock.

Frequently asked questions about the purple stimulator pen

Is the round tip removable?

The listing does not establish removal or replacement. Treat the ball and neck as one assembly until a drawing and sample prove otherwise.

How many settings does it have?

The supplier field says ten frequencies, but the exact pattern sequence and measured output await sample verification.

Can it be submerged?

No submersion claim is published. The IPX7 field needs a valid model-matched report and complete-unit checks.

What is the rose-gold section made from?

The visible neck has a polished rose-gold appearance; its substrate, coating and body-contact suitability are pending supplier documents.

Does the box include a charging cable?

Cable inclusion, connector type and electrical ratings must be confirmed on the sealed packing list.

Is the purple color guaranteed?

Purple is a listed option, but hue, finish and batch tolerance need approval against a signed color sample before bulk ordering.