Three-Size Elliptical T-Base Anal Plug Set

Compare three sizes as a measured progression

This three-size elliptical T-base anal plug set is a non-powered concept with one small, one medium and one large smoky-plum tapered plug. Each piece has a narrow neck and a wide charcoal T-shaped retrieval base with one centered oval opening.

The image establishes relative order only. It does not confirm usable dimensions, material, hardness, flexibility, body-contact suitability or final size spacing.

Assign permanent identities to small, medium and large

Mark the three pieces S, M and L on packaging or a non-contact base surface. Lot records should link each identifier to its measured dimensions, colour reference and inspection results.

Visual size alone is not sufficient for warehouse picking, care guidance or progression decisions.

Measure every body at the same checkpoints

Record total length, usable length, maximum diameter, tip radius, taper length, neck diameter and neck length for S, M and L. Use calibrated tools and a defined low-force method that does not distort the surface.

Publish the actual measurements and production tolerance only after the approved samples match the purchase specification.

Calculate progression gaps instead of assuming them

Compare circumference and cross-sectional area at the maximum diameter, not only the nominal width. Document the percentage increase from S to M and M to L and assess whether each step is intentionally graded.

A three-piece set does not prove that every user should progress through all sizes or within any particular timeframe.

Inspect the rounded tips and smooth tapers

Check every dome and taper for seams, flash, pits, voids, tack, pigment change and abrupt geometry. Use magnification and a lint-free cloth to detect catches that are hard to see.

Any crack, sharpness, exposed component or unexplained hard point disqualifies the affected piece.

Verify each neck as the retention transition

Measure neck geometry separately from the maximum body diameter and base. Inspect the neck-to-body and neck-to-base junctions under gentle flex for whitening, separation or thin sections.

Neck proportions must be evaluated for the intended use of the exact sample; appearance does not establish safe retention.

Measure all three wide T-bases

Record base width, depth, thickness, edge radius and projection beyond the neck in every direction. The wide base must remain readily accessible and must not fold or pass through the neck measurement fixture under bounded load.

Exact minimum base dimensions and deformation limits remain pending a documented safety review.

Test one oval opening per base

Inspect each centered opening for smooth internal edges, adequate wall thickness and resistance to tearing during ordinary retrieval handling. Cycle a rounded test grip through the opening without hanging or suspending the product.

The opening is a retrieval aid only, not an anchor point for weights, restraints or prolonged traction.

Confirm material and hardness by size

Request traceable composition, pigments, cure system and hardness data for S, M and L. Test whether larger molding mass changes flexibility, surface cure, odor or heat response even when the supplier names one material.

Silicone, body-safe, hypoallergenic, waterproof and phthalate-free wording remains pending valid evidence for each production lot.

Choose a size independently for each session

Base selection on measured dimensions, current experience, comfort and a conservative plan rather than a requirement to move upward. Inspect the chosen plug and keep its wide base and opening accessible throughout use.

Never move to a larger size to overcome pain, tightness, numbness or resistance.

Use slow insertion and a direct withdrawal path

Apply generous verified-compatible lubricant, begin with the rounded tip and proceed slowly without twisting or force. Maintain control of the T-base and stop if the product cannot move comfortably in either direction.

Pain, bleeding, loss of sensation, unexpected resistance or a retained item requires immediate cessation and appropriate medical guidance.

Keep sessions actively monitored

Periodically confirm comfort, base accessibility and unchanged product position. Do not sleep, exercise intensely, drive or use intoxicants while evaluating fit and retention.

No duration claim is offered; a validated instruction set must define conservative limits for the exact materials and geometry.

Clean the selected piece before changing sizes

Follow confirmed cleaner, water, temperature and contact-time limits. Reach the tip, taper, neck, top and underside of the T-base and the full oval opening, then rinse only as the material specification permits.

Do not move an uncleaned piece between users or body areas. Sharing requires a validated barrier and between-user cleaning protocol.

Dry and store three sizes separately

Dry every surface and base opening completely, then place S, M and L in separated compartments to prevent unverified material contact and size mix-ups. Keep them away from heat, sunlight, dust, pigments and sharp objects.

Before reuse, repeat the full inspection and compare each identifier with the approved measurement record.

Build landed price from a three-piece benchmark

An Alibaba anal-plug category page displayed one three-piece set at USD 0.60 to 3.25 with MOQ 3. It is a broad category reference only and does not identify this elliptical T-base design, its material or an approved supplier.

The public procurement benchmark supports an EUR 42.99 planning price after provisional allowance for China-origin freight, three-size measurement, progression review, material and hardness checks, tip, neck, base and opening inspection, cleaner and lubricant compatibility, separated packing and discreet fulfilment. Exact supplier, quote, MOQ, composition, dimensions, packed weight, freight, duty, tax, certification, payment terms and lead time remain pending.

Frequently asked questions

How many plugs are included?

The concept contains exactly three separate pieces in small, medium and large relative sizes.

Does each base have an opening?

Yes. Every wide elliptical T-base shows one centered oval retrieval opening.

Must the three sizes be used in order?

No. Selection depends on verified dimensions, current experience and comfort; progression is never mandatory.

What material is planned?

Exact composition, pigment and hardness remain pending traceable supplier documents and sample testing.

Are the rendered dimensions final?

No. The image shows relative grading only; all usable measurements require physical sample verification.

Can the oval opening hold a weight or restraint?

No. It is proposed only as a hand-accessible retrieval aid and must not be used as an anchor.