The HB-2426 is identified by its visible geometry
This page is mapped only to Alibaba offer 1601814530617, the HB-2426 model and its Black selector. Exact imagery shows a single flexible-looking sleeve with one upper cylindrical opening, one lower oval loop, a lateral window, rounded raised nodes, one control button and two magnetic charging contacts. It is not represented as a remote-controlled or insertable prostate device because those functions are not evidenced by the selected product.

Three openings serve different structural roles
The large upper bore forms the sleeve, the lower oval loop forms a separate retention path and the side window relieves part of the wall. The supplier does not publish the lower opening, side-window dimensions, wall thickness or which areas are intended to stretch.
Rounded nodes cover the outside surface
Multiple raised rounded nodes run along the outer walls. Their height, hardness, seam quality and response under stretch require tactile and dimensional inspection; the nodes are described as texture, not as a guaranteed stimulation outcome.
The size artwork supplies inspection targets
The exact graphic marks 129 mm overall height, 49 mm front width, 46 mm side depth and 39 mm across the upper opening. The listing selector instead states 49 × 46 × 129 mm, which is directionally consistent. Tolerances and measurement points are not published.

A size drawing is not a wearable fit chart
The 39 mm upper opening is shown only at rest. Maximum safe stretch, recommended circumference, elastic recovery, pressure distribution and lower-loop fit are absent. The page therefore makes no universal body-size, delay or erection-support claim.
Circulation checks define the use boundary
Test the unpowered item briefly before activating it. Remove it immediately for pain, numbness, tingling, discoloration, coldness, swelling or loss of sensation. Never sleep, become intoxicated or enter restraint while wearing a constricting loop.
Ten waveforms are marketplace claims
The supplier graphic presents ten numbered vibration patterns, and the attribute table also says ten frequencies. A mode card, intensity scale, motor location and output data are not supplied, so the storefront records ten as an unverified listing statement rather than a measured specification.

Control access must remain immediate
The selected unit shows one physical button and no separate remote. Before wear testing, confirm power-on behavior, the route through every pattern, long-press shutdown and restart level. A user must be able to stop the motor without relying on another device or person.
Magnetic contacts do not establish the charging specification
Two contacts are visible and the listing says magnetic charging, but the matching lead, input voltage, current, polarity, protections, charge time and battery capacity are missing. Charge only with the production-matched cable after those details are documented.
Silicone plus ABS needs component-level confirmation
The marketplace names silicone and ABS without mapping them to the flexible sleeve, switch housing or internal structure. Silicone grade, hardness, cure chemistry, pigments, plastic grade, restricted-substance evidence and batch traceability remain pending.
IPX6 is not accepted without the report
The page lists IPX6 but provides no model-specific laboratory evidence or instruction for the charging contacts. Until a production-matched ingress report and cleaning procedure are reviewed, keep the device away from immersion and dry the contact area completely.
The sound graphic is excluded from the sales gallery
One supplier image claims no more than 55 dB but omits distance, background level, load, mode and equipment. It remains in the private source archive and is not used to support a quiet-product promise.
Cleaning follows the most conservative material boundary
Switch off, remove the charging lead and wipe accessible surfaces with a method later approved for the confirmed materials. Pay attention to the raised nodes, side window, loop junction and contact recess. Do not soak, boil or use aggressive solvent without written compatibility evidence.
Pre-use inspection focuses on stretched areas
Reject a unit showing a torn loop, whitening, tackiness, sharp mould flash, exposed gap, loose button, corroded contact, abnormal heat or unpredictable motor behavior. A damaged flexible powered product should be quarantined, not glued or patched.
The public 200-unit product reference is EUR 3.63
The live offer lists EUR 5.07 for 10–49 pieces, EUR 4.89 for 50–149 and EUR 3.63 from 150 pieces. For the planned 200-unit quantity, EUR 3.63 is the visible product-cost reference before freight, clearance, duty and VAT where applicable.
The displayed ten-piece freight is not scaled up
Alibaba shows EUR 30.60 for ten pieces with an estimated 13–17-day transit. Carton quantity, dimensional weight, carrier terms and Incoterm for 200 pieces are not shown, so no multiplication or per-unit freight assumption is made.
EUR 29.99 is a provisional landed-risk plan
The preview price allows for China-to-Portugal freight planning, opening and stretch measurement, fatigue tests, seam and node inspection, motor and restart mapping, battery, charging, sound, ingress and material review, discreet packing, payment cost and expected quality loss. It will be recalculated after samples and a written quotation.
Frequently asked questions
Is this a prostate massager?
The supplier title uses that phrase, but the exact item is catalogued only as a ring sleeve because no insertable section or prostate-contact evidence is shown.
Does it come with a remote?
No remote is visible or listed in the selected configuration. The exact product shows one onboard button.
What size does it fit?
The supplier marks a 39 mm upper opening at rest, but safe stretch, circumference range and lower-loop dimensions are still pending.
Are there ten modes?
The listing and graphic both state ten, but the final sequence and output require sample testing.
Is it waterproof?
IPX6 is a marketplace declaration only until a model-specific report and cleaning instruction are approved.
Is the material body-safe?
No such claim is made. Silicone plus ABS is listed, while component mapping, grade and test evidence remain unverified.
Launch approval requires the exact production sample
Anonymous purchasing remains disabled until the supplier confirms the opening sizes, stretch limits, fit guidance, material breakdown, pattern map, motor placement, start and stop behavior, battery, charge lead and input, runtime, ingress, cleaning, pack contents, conformity documents, image rights, carton data, 200-piece freight, tax, lead time, payment, warranty and defect terms.
| Color | Black |
|---|---|
| Model | HB-2426 |
| Supplier-listed size | 49 × 46 × 129 mm; tolerances pending |
| Supplier-listed material | Silicone + ABS; component mapping pending |








Reviews
There are no reviews yet.