LCD-Display Mini Wand Massager with Rounded Head and Front Controls

Trace this compact wand to one exact supplier listing

This LCD-display mini wand massager follows a specific black supplier model rather than a generic wand silhouette. Its visible identity is a broad rounded head, a slim rose-gold-tone collar, a short black handle, a narrow dark display window and a vertical group of control buttons.

The artwork documents outward design only. Internal construction and functional claims remain subject to quotation, specification review and an approved sample.

Inspect the rounded head before defining its contact profile

Measure head width, height, depth, edge radius and the transition into the neck. Photograph the approved sample from the front, side and top so retail imagery can preserve the same compact proportions.

Softness, surface coating, material composition and skin-contact suitability are not inferred from appearance.

Validate the rose-gold collar and flexible neck assembly

Record collar diameter, finish, gap control and the neck’s unloaded position. If the production sample bends, measure its travel, restoring force, cycle life and pinch clearance before describing flexibility.

Metal type, plating, corrosion resistance and a 360-degree movement claim remain unconfirmed.

Confirm what the narrow front display actually reports

Power the sample through every supported state and map each symbol, number and indicator. Check readability in daylight and low light, viewing angle, refresh behaviour and the display response while controls are operated.

The storefront name identifies the visible display design; no exact readout or status function is promised yet.

Map each front button to a verified control action

Number the buttons from top to bottom, document short press, long press and combination behaviour, and confirm whether any lock or memory function exists. Measure activation force and check accidental operation during handling.

Mode count, intensity count, independent adjustment and one-hand operation are supplier assertions pending sample testing.

Characterise output without publishing invented power figures

Use a repeatable fixture to log acceleration, frequency, amplitude, current draw and head displacement at every confirmed setting. Report the test method, mounting pressure and battery state with any future performance comparison.

Terms such as strong, deep, quiet or constant are withheld until measured against a defined protocol.

Verify the charging interface and electrical package

Identify the exact port or contact arrangement, supplied lead, input rating, protection circuit and charge indicator from the approved unit and documents. Measure charge time, usable runtime and standby drain across multiple cycles.

USB charging, a 1.5-hour charge and 1.5-hour use time appear in supplier media but remain pending confirmation and are not guaranteed specifications.

Test ingress before any waterproof statement goes live

Request a traceable ingress report that identifies the same model and construction, then inspect seals around the display, controls, collar and charging interface. Cleaning guidance must follow the verified rating and electrical design.

The supplier image states IPX7, but this retail page does not treat that claim as confirmed evidence.

Measure sound heat and handle comfort under load

Log A-weighted sound at a defined distance in a controlled room and surface temperature at the head, collar, display and grip during a full duty cycle. Record grip circumference, button reach and balance for the production sample.

Quiet operation, safe continuous duration and ergonomic suitability require measured limits rather than marketing language.

Confirm every material that can contact skin or cleaning fluid

Request the bill of materials, coatings, colorants, adhesives, restricted-substance records and lot controls for the head, neck, collar, handle, display cover, buttons, seals and charging components.

Silicone, body-safe, latex-free, phthalate-free, hypoallergenic and nickel-free descriptions remain withheld without documentary and sample evidence.

Build cleaning instructions around validated construction

After ingress and chemical-compatibility checks, publish an approved wiping or rinsing route, suitable cleaner, water temperature, drying position and charging-port precautions. Inspect seams, display clarity and collar finish after repeated cycles.

Do not immerse, boil, sterilise or apply solvent until the tested sample and manufacturer instructions explicitly allow it.

Define the retail pack from the final packing list

The proposed inventory centres on one black mini wand. Any charging cable, storage pouch, instructions, adaptor, gift box or spare part must be named only after the supplier confirms the exact option and sealed-unit packing list.

Picking staff should match the listing ID, black finish, rounded head, rose-gold-tone collar and display-control layout before acceptance.

Inspect finish alignment and function lot by lot

Incoming checks should cover head shape, neck seating, collar scratches, handle moulding, display alignment, button travel, charging, each confirmed setting, sound, heat and cleaning resistance. Record serial or batch identifiers where supplied.

A loose head, pinching neck, lifting finish, unclear display, stuck control, unstable output, overheating, fluid entry or damaged charging interface is a quarantine condition.

Keep public artwork aligned with the procurement reference

The public image is an original unbranded rendering that preserves the source model’s black rounded head, rose-gold-tone collar, display window and vertical controls. Supplier photographs remain internal procurement references unless written media-use permission is obtained.

Future angles must continue to depict this sourced structure rather than introducing a different wand and attaching the same supplier record.

Plan EUR 44.99 with landed cost still pending

The internal procurement record stores the exact supplier, detail URL, listing ID, observed EUR 7.54-8.79 price range, MOQ of one piece and check date. The range is a marketplace reference, not a binding quotation for the selected option.

EUR 44.99 is a provisional retail price allowing for China-origin freight, sample validation, electrical and ingress checks, discreet fulfilment and expected handling loss. Packed weight, freight, duty, tax, payment terms, lead time and final landed cost remain pending a destination-specific quote.

Frequently asked questions about this display mini wand

Is the product exactly tied to a supplier listing?

Yes. The hidden procurement record identifies one exact listing, company, reference price, MOQ and check date.

Does the screen show the active level?

A display is visible, but its symbols and operating logic require confirmation on an approved sample.

How many patterns and intensities are included?

Supplier graphics mention ten patterns and eight intensity levels; these counts remain unverified and are not published as final specifications.

Is the head flexible?

The supplier presents a moving head, but range, force, durability and pinch clearance must be tested before a flexibility claim is approved.

Can it be submerged in water?

No immersion guidance is approved. A supplier IPX7 statement still requires model-matched evidence and sample validation.

What arrives in the box?

Only the wand is assumed for planning. Cable, instructions, pouch and packaging contents await a confirmed packing list.