Navy and Silver Seven-Piece Bondage Set with Cross Connectors

Trace this navy bondage set to model LYSM0675

This navy and silver seven-piece bondage set is linked to one live Alibaba listing from Dongguan Loyip Leather Products Co., Limited, listing ID 1600185109670. The source identifies model LYSM0675, PU construction and a ten-set order threshold.

The public image removes the supplier mannequin and does not prove component counts, hardware ratings or use safety.

Match the navy silver hardware system as one fingerprint

The selected variant combines deep navy straps, polished silver buckles, D-rings, rivets and snap hooks. Its source layout centres on a narrow collar and lead, a wide waist belt, paired cuffs and cross-connection straps.

Black-and-gold, red-and-gold and other listed colors are separate variants. Mixed finishes should not be accepted under the navy-and-silver SKU.

Reconcile what the supplier counts as seven pieces

Pairs, detachable leads and connectors can be counted differently by factories. The purchase order must list every physical item, quantity, strap and hook rather than relying only on “seven-piece” wording.

Photograph all components beside numbered labels during sample approval and again during receiving inspection.

Map each connector before writing setup guidance

Record which D-ring accepts each snap hook, the adjustment range of every strap and whether connectors can detach without twisting adjacent cuffs. Draw a component map that matches the packed set.

The marketplace image shows a Y-shaped or cross-linked centre arrangement; its exact attachment points remain pending the approved sample.

Treat the collar as a decorative boundary not a load point

Measure internal circumference, width, edge finish, buckle spacing and accessible release time. Never represent the collar, lead or D-ring as suitable for suspension, towing, choking or body-weight loading.

Any neck-worn component requires loose fit, continuous communication and immediate removal at discomfort, breathing change, dizziness or numbness.

Measure cuff fit and circulation clearance

Document minimum and maximum internal circumference for wrist, thigh and ankle pairs. Check edge padding, strap overlap, buckle position and whether the nearest setting creates pressure points.

Use should allow circulation checks and fast removal. Tingling, color change, cold skin, swelling, sharp pain or loss of sensation are stop signals.

Inspect the wide waist belt independently

Measure overall length, usable buckle range, width, backing, edge finish and the placement of every D-ring. Verify that hardware does not press directly on bony areas during ordinary movement.

The belt is not a fall-arrest harness, lifting device or rated safety system.

Bench-test buckles rings hooks and rivets

Inspect plating, closures, burrs, gate alignment, rivet setting and stitch or adhesive lines. Apply only controlled low-level product tests defined with the supplier; do not extrapolate to human load ratings.

No working-load limit, break strength or suspension capacity is published because the listing supplies none.

Verify accessible release routes for every connection

Time removal at each buckle and snap hook with slack and with a modest controlled strap tension. Keep safety shears or an equivalent cutting tool nearby when a soft component cannot be released quickly.

Practice the release sequence before wear. Never lock a participant in place without an agreed signal, attentive supervision and a clear exit plan.

Confirm PU layers backing and edge coating

The listing states PU, but that does not identify substrate fabric, thickness, plasticisers, dyes, adhesives or edge paint. Request component declarations and lot-matched restricted-substance evidence.

Leather, vegan, skin-safe, latex-free and phthalate-free wording is withheld until documents support the exact production set.

Check navy shade and silver finish under wear simulation

Compare every strap under neutral light, then rub dry and damp white cloths across edges and high-contact zones. Inspect metal finish after repeated buckle and snap-hook cycles.

Color transfer, corrosion resistance, sweat resistance and finish durability remain pending sample tests.

Separate cleaning methods for straps and hardware

Request permitted cleaners, contact time and drying instructions for the PU surface, backing, stitching and plated metal. Trial the method on one sample before applying it to the whole set.

Submersion, alcohol, bleach, machine washing and heat drying are not recommended without manufacturer evidence.

Verify weight packing and component protection

The source attributes state 1.1–1.2 kilograms, yet the logistics section displays zero gross weight and zero volume. Those contradictory fields cannot support freight costing.

Confirm one-set net weight, packed weight, bag or color-box configuration, carton quantity, carton dimensions and separators that prevent metal hardware from marking PU surfaces.

Plan EUR 89.99 from the observed supplier reference

On 10 August 2026 the listing displayed EUR 17.48–18.36 with a minimum order of ten units. Sample fee, navy option price, exact component list, payment terms and lead time remain pending a written quotation.

EUR 89.99 is a planning retail price allowing for China-origin freight, the unverified 1.1–1.2-kilogram set weight, component and finish inspection, release testing, material review, discreet fulfilment and expected hardware quality loss. Duty, tax, verified packing and final landed cost remain pending.

Approve the set through a consent-centred sample review

The pre-production sample should be assessed by component count, measurement range, release access, edge comfort, finish consistency, hardware operation, cleaning response and packing. Any sharp edge, stuck gate, cracked coating or uncertain component identity should block approval.

The storefront remains pre-launch. Inventory 200 is a planning quantity rather than evidence of inspected physical stock.

Frequently asked questions about the navy seven-piece set

Exactly which seven pieces are included?

The listing calls it a seven-piece set, but pair counting and connector inclusion need a signed component list and sealed sample.

Can the collar support pulling or suspension?

No. No neck component is presented as load-bearing, and the set has no verified working-load rating.

Are all cuffs adjustable?

The supplier describes adjustable sizing, but each minimum and maximum circumference remains pending measurement.

Is the material genuine leather?

No leather claim is made. The live listing identifies PU, with its backing and full composition still pending.

How should the set be cleaned?

Use only a method confirmed for the exact PU, backing, stitching and plated hardware after a sample test.

Is this suitable for beginners?

Experience level does not remove the need for consent, continuous communication, circulation checks, quick-release practice and strict avoidance of neck or body-weight loading.