Seven-Fall Twin-Texture Sensory Flogger

Fan exactly seven flat falls from one reinforced collar

This seven-fall twin-texture sensory flogger concept combines one deep-plum braided handle, one closed wrist loop and exactly seven individually visible flat falls. Three plum falls show a soft microfiber-like surface, while four charcoal falls show a smoother matte face.

The image establishes visual architecture only. It does not confirm dimensions, materials, weight, flexibility, edge finish, root retention, loop strength, impact range, cleanability or production readiness.

Confirm a one-tool inventory

The planned pack contains exactly one non-powered flogger. Cuffs, collar, blindfold, storage bag, spare falls and cleaning accessories are excluded unless a final packing list states otherwise.

Require lot identification and component traceability for the handle core, grip wrap, both end caps, root collar, seven falls and wrist loop.

Label and measure every fall separately

Number the falls F1 through F7 around the collar. Record free length, width, thickness, mass, tip radius, edge radius, root spacing and neutral angle for each piece.

Inspect for hidden overlap at the root and compare left-right distribution rather than assuming the visible fan is mechanically balanced.

Compare the plum and charcoal surface groups

Test the three plum and four charcoal falls for face texture, backing, fibre or polymer composition, friction, flexibility, moisture uptake and dimensional recovery. Record whether colour indicates a genuine material difference or only a finish.

Microfiber, suede, leather, vegan leather, PU, PVC and hypoallergenic descriptions remain pending exact supplier documentation.

Round every tip and longitudinal edge

Measure end radius, edge thickness and cut consistency under magnification. Flex every fall in both directions and inspect for burrs, sharp corners, coating cracks, fibre shedding, delamination and rough adhesive.

Reject any fall whose tip or edge changes from rounded to sharp after conditioning or validated cleaning.

Validate retention inside the root collar

Request a section drawing of the fall bundle, anchor, adhesive, fastener and collar. Apply straight pull, angled pull, twist and repeated fan-spread cycles to F1 through F7 individually and as a group.

Record slip, root tearing, collar movement and handle-core damage against predefined acceptance limits.

Measure the braided handle as a control surface

Record grip length, diameter, braid pitch, seam or wrap termination, compression, friction when dry and damp, handle-core stiffness and end-cap security. Check for ridges or gaps that concentrate hand pressure.

A braided appearance does not establish genuine leather, hand assembly or slip resistance.

Test the closed wrist loop as a retention aid

Measure loop circumference, cord diameter, braid, attachment, edge comfort and load-extension behaviour. Confirm that it can be released from the hand immediately and does not tighten into a locking loop.

The loop is not a restraint, suspension point, body anchor or load-rated safety component.

Map swing balance and fall spread

Record total mass, handle mass, fall-bundle mass, centre of gravity and moment of inertia. Use instrumented low-energy swings to measure fan width, arrival spread, tip velocity, rebound and whether heavier falls lead the group.

Mixed widths and surfaces can change timing, so one overall weight figure is insufficient.

Calibrate sensation from low energy upward

Begin on an instrumented pad with the lightest controllable motion. Record peak force, contact area, pressure distribution and repeatability for short wrist movement, longer arc and reduced fall count gathered in the hand.

Never infer a safe level from sound alone; a louder landing may not correspond to the highest measured force.

Define consent and body-area boundaries

Use only between informed consenting adults with an agreed stop signal, continuous observation and immediate ability to stop. Keep practice away from the head, face, front or sides of the neck, spine, kidneys, joints, broken skin and any numb or medically vulnerable area.

Stop for unexpected pain, numbness, dizziness, breathing difficulty, skin damage, loss of circulation or loss of communication, and seek appropriate medical help when indicated.

Request full material and restricted-substance evidence

Obtain compositions, coatings, dyes, adhesives, restricted-substance reports, colourfastness and lot traceability for all seven falls, the braided wrap, core, caps, collar and loop.

Skin-safe, latex-free, phthalate-free, non-toxic, odourless and washable claims remain unavailable until exact-model evidence is approved.

Clean all faces edges and root gaps

Follow only the validated cleaner, water temperature, contact time and drying method. Wipe both faces and all edges of F1 through F7, then clean the collar, braided grip, caps and loop without saturating hidden adhesive or absorbent layers.

Immersion, boiling, bleach, solvents, machine washing, high heat and shared use remain excluded unless exact evidence supports them.

Cycle the complete tool before procurement

Combine repeated low-energy swings, individual fall pulls, fan spreading, handle gripping, loop loading, cleaning, drying and storage conditioning. Inspect fall elongation, surface wear, colour transfer, edge change, root slip, collar movement and grip loosening.

Track each fall by number so an early local failure is not hidden inside the bundle average.

Build landed price from a flogger benchmark

An Alibaba flogger category page displayed one red-and-black 30-inch multi-fall design at USD 3.85 to 4.37 with MOQ 1. It is a broad procurement benchmark only and does not identify this seven-fall twin-texture construction or an approved supplier.

The public procurement benchmark supports an EUR 27.99 planning price after provisional allowance for China-origin freight, exact-sample measurement, fall, edge, root, handle, loop, balance, impact, materials, colourfastness, cleaning and fatigue validation, discreet fulfilment and expected handling loss. Exact supplier, quote, MOQ, dimensions, materials, packed weight, freight, duty, tax, certification, payment terms and lead time remain pending.

Frequently asked questions

How many falls are shown?

Exactly seven separate flat falls are visible in the fan.

Are the plum and charcoal falls different materials?

Their surfaces appear different, but exact composition and backing require supplier documents and approved samples.

Is the wrist loop load rated?

No. It is planned only as a hand-retention aid and must never be used for restraint, suspension or anchoring.

Does a wider swing always feel stronger?

Not reliably; measured force also depends on speed, angle, fall timing, flexibility and contact area.

Can the tool be immersed for cleaning?

Not unless an exact-model cleaning study confirms that the root anchor, adhesive, handle and loop tolerate immersion.

Is the product genuine leather?

No leather claim is accepted until component-level composition and traceability evidence is approved.